OVERVIEW
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box (where applicable)
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 5000 RPM
Replacement Filter 701-462
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 8
Clamp Material Steel
Clamp Style Spring
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-19
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 11.6 lb (5.3 kg)
Product Box Height 15.6 in (396 mm)
Product Box Length 19.9 in (505 mm)
Product Box Width 15.6 in (396 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2017 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2016 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2015 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2014 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2013 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2012 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

Skip to the beginning of the images gallery
OVERVIEW
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Increases horsepower and torque
Replaces stock air box, air filter and intake tubing
Cold Air Dam panels block out hot engine bay air
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Replacement Filter 701-456
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-18
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11.2 lb (5.1 kg)
Product Box Height 10.7 in (272 mm)
Product Box Length 36.3 in (922 mm)
Product Box Width 12.5 in (318 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2006 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2005 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2004 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.
Round Straight; 3.063 In (78 Mm) Flange Id; 3 In (76 Mm) Height; 7 In (178 Mm) Base; 7 In (178 Mm) Top.

Round Tapered; 6 In (152 Mm) Flange Id; 6 In (152 Mm) Height; 7.5 In (191 Mm) Base; 5 In (127 Mm) Top.
Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.

Round Tapered; 4 In (102 Mm) Flange Id; 5 In (127 Mm) Height; 5.375 In (137 Mm) Base; 4.375 In (111 Mm) Top.
Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.

VEHICLE FITMENT
2011-2014 Ford F-150 6.2L V8
*CARB EO# D-758, D-803-9

2011-2014 Ford F-150 Raptor 6.2L V8
*CARB EO# D-758, D-803-9

CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.

Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Re-usable High-Performance Filtration Options (DryTech, MaxFlow)
Up to 50,000 miles no maintenance*
98%+ Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
No Maintenance PowerCore Filtration Available for Select Application
Made in the USA

Serrated/Helix Design:
The Serrated/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with Helix only designs.

6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are constructed from 6061-T6 billet aluminum precision machined for light weight, high strength and perfect fit and finish.

Longer Intake Tract:
Adding a Silver Bullet Throttle Body spacer lengthens the intake tract which helps increasing intake air speed increasing performance and improved throttle response.

Installation Is A Snap:
This Silver Bullet throttle body spacer uses all factory mounting locations providing stability and a hassle-free installation.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1998-2004 Lexus LX470 V8 4.7L Gas
2003-2004 Toyota 4Runner V8 4.7L Gas
1998-2004 Toyota Land Cruiser J100 V8 4.7L Gas
2001-2004 Toyota Sequoia V8 4.7L Gas
2000-2004 Toyota Tundra V8 4.7L Gas

Serrated/Helix Design:

The Serrated/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs.
6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish.

Installation Is A Snap:
This Silver Bullet throttle body spacer uses all factory mounting locations and a gasket providing stability and a hassle-free installation.

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2001-2016 Nissan Patrol (Y61) w/ Manual Trans. I6 4.8L Gas

PRODUCT DESCRIPTION
3.0" Cat-Back, Single Side Exit with Single 4.0" Polished Slash Cut Tip
Sport Sound Level

Premium Stainless Steel Construction
Easy Bolt-on Installation
No Welding Needed
Patented No-Drone, Reflective Sound Cancellation (RSC®) Technology
Straight-through Design
Mandrel Bent
All Hardware and Detailed Instructions Included
Proudly Manufactured in Berea, Ohio

VEHICLE FITMENT
2011-2014 Chevrolet Silverado 2500 6.0L V8
Crew Cab/Standard Bed 153.7" Wheelbase

2011-2014 GMC Sierra 2500 6.0L V8
Crew Cab/Standard Bed 153.7" Wheelbase

INSTALLATION

YEARS: 2011, 2012, 2013, 2014

PRODUCT DESCRIPTION
Closed Box Air Intake with PowerCore® Filter
PowerCore® Filter Part # 61513 No Maintenance - No Oil - Dry Replacement Filter Part # 61513

CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.

Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Maintenance Free Donaldson PowerCore® Filter
Up to 150,000 miles or 4 years. No oil needed
99.99% Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
Made in the U.S.A.


VEHICLE FITMENT
2007-2011 Jeep Wrangler JK 3.8L V6
*CARB EO# D-758 (2007-2011)

INSTALLATION
YEARS: 2007, 2008, 2009, 2010, 2011

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

his vehicle and part number combinations are exempted on the following Executive Order #:


VEHICLE FITMENT & EMISSIONS

2009-2013 Chevrolet Silverado 1500 4.3L V6
MaxFlow 5 Oiled Filter (CARB EO # D-526-7)
DryTech 3D Dry Filter (CARB EO # D-526-7)
PowerCore Filter (CARB EO # D-526-7)

2009-2013 GMC Sierra 1500 4.3L V6
MaxFlow 5 Oiled Filter (CARB EO # D-526-7)
DryTech 3D Dry Filter (CARB EO # D-526-7)
PowerCore Filter (CARB EO # D-526-7)


INSTALLATION INSTRUCTIONS
Instruction Sheets for Part 15043 - Please note your lid and filter may appear different than images in the instruction sheets

Instruction Sheets for Part 150436 - Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow Diesel Oiled Filter
Filter Part # 61517 5150
Pre-Filter Part # 51921 51906
Filter Maintenance No Maintenance 5100
NOTE: Fits 2012 vehicles with 2 sensors (MAF & ATS), if only 1 sensor (MAF only) use Part # 153666


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following:
NOTE: Fits 2012 vehicles with 2 sensors (MAF & ATS), if only 1 sensor (MAF only) use Part # 153666

2013-2016 Chevrolet Silverado 2500HD 6.6L V8 (LML)
MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

2013-2016 Chevrolet Silverado 3500HD 6.6L V8 (LML)
MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

2013-2016 GMC Sierra 2500HD 6.6L V8 (LML) MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

2013-2016 GMC Sierra 3500HD 6.6L V8 (LML) MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729754

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2009-2010 Ford F-150 5.4L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-4)
PowerCore Filter (CARB EO # D-526-4)

2010 Ford F-150 Raptor 5.4L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-4)
PowerCore Filter (CARB EO # D-526-4)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729850 (2011)
Exhaust Part # 54387



VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2011-2014 Ford F-150 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

2011-2014 Ford F-150 Raptor 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Exhaust Part # 54836


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are CARB exempt for the following combinations:.

2015-2020 Ford F-150 EcoBoost 2.7L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2017)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2017)
DryTech Filter (CARB EO #D-803-3 2015-2017)

2015-2016 Ford F-150 EcoBoost 3.5L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2016)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2016)
DryTech Filter (CARB EO #D-803-3 2015-2016)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2007-2008 Ford F-150 4.6L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

2007-2008 Ford F-150 4.2L L6
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Throttle Body Spacer Part # 729850
Exhaust Part # 54837


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following:

2015-2020 Ford F-150 5.0L V8
MaxFlow 5 Oiled Filter (CARB EO # D-803-9 2015-17)
DryTech 3D Dry Filter (CARB EO # D-803-9 2015-17)
PowerCore Filter (CARB EO # # D-803-9 2015-17)
*2018+ EO Approval requires Hydrocarbon Absorber Material (HC Trap) which is not available on this intake.

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

Cleaning Kit for MaxFlow 5 and Primo Diesel Cotton Gauze Filters (Blue)
Intended for all gas oiled filters, and for diesel oiled blue filters.

Air flow test have proven that cotton-gauze filters flow much more air than paper element filters do. However, when they get dirty, they can clog up and limit air flow. This is one reason why you should clean your air filter with Volant's filter cleaner kit. The kit contains Volant's filter cleaner that loosens and removes dirt trapping capabilities. Volant's filter oil contains a blue dye to easily see where the oil has saturated into the filter, eliminating the common mistake of over oiling the filter. When used correctly, Volant's filter cleaner kit can maintain the life and performance of your Volant high-flow filter and Cool Flow air intake system.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 4.0"
Base: 6.0"
Top: 4.75"
Height: 7.0"
Shape: Round


Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 6.0"
Top: 4.75"
Height: 6.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 5.0"
Top: 3.5"
Height: 7.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 5.0"
Top: 4.75"
Height: 8.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

Replacement Filter:
CADILLAC LXR-V 2005-2009 4.6L (Part # 25864151)
Dodge Viper 2003-2006 8.3L (Part # 26083150)

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 5.0"
Base: 6.5"
Top: 4.75"
Height: 8.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 6.0"
Base: 7.5"
Top: 4.75"
Height: 5.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

DESCRIPTION
For Use with Oiled Filters 5113 or 5129

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters # 5117, # 5118, # 5122, # 5124, # 5151

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters 5153

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters # 5126

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters: # 5144, # 5152

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

CADILLAC, AVALANCHE
SILVERADO
SIERRA
SUBURBAN, TAHOE
YUKON
2007-2014 Cadillac Escalade 6.2L V8
CARB EO # D-803-7

2007-2014 Cadillac Escalade ESV 6.2L V8
CARB EO # D-803-7

2007-2013 Cadillac Escalade EXT 6.2L V8
CARB EO # D-803-7


2007-2009 Chevrolet Avalanche 1500 6.0L V8
CARB EO # D-803-7

2007-2013 Chevrolet Avalanche 1500 5.3L V8
CARB EO # D-803-7 (2007-2009)

DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number are not CARB exempted or legal for sale in California:

2011-2020 Chrysler 300 3.6L V6
CARB EO Unavailable

2011-2020 Dodge Challenger 3.6L V6
CARB EO Unavailable

2011-2020 Dodge Charger 3.6L V6
CARB EO Unavailable

2011-2014 Dodge Durango 3.6L V6
CARB EO Unavailable

2019c RAM 1500 Classic 3.6L V6
CARB EO Unavailable


2018-2021 Jeep Wrangler JL 3.6L V6
CARB EO Unavailable

2020-2021 Jeep Gladiator JT 3.6L V6
CARB EO Unavailable

2012-2018 Jeep Wrangler JK 3.6L V6
CARB EO Unavailable

2011-2014 Jeep Grand Cherokee 3.6L V6
CARB EO Unavailable

DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number are not CARB exempted or legal for sale in California:

2004-2014 Ford F-150 5.4L V8
CARB EO Unavailable

2010 Ford F-150 Raptor 5.4L V8
CARB EO Unavailable

2005-2010 Ford F-250/F-350 Super Duty 5.4L V8
CARB EO Unavailable

2005-2013 Ford Expedition 5.4L V8
CARB EO Unavailable

2007-2014 Lincoln Navigator 5.4L V8
CARB EO Unavailable

2006-2008 Lincoln Mark LT 5.4L V8
CARB EO Unavailable

Waste Gate
Color: Black
WASTE GATE 38 MM