A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Skip to the beginning of the images gallery
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
Estimated Horsepower Gain 12.13 HP @ 4623 RPM
Replacement Filter RU-1045
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Regular
CARB EO Number D-269-34
Couplers Included 1
Type Gen II
Product Style 57 Series FIPK
Air Filter Height 8 in (203 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11 lb (5 kg)
Air Filter Large End Diameter 5.5 in (140 mm)
Product Box Height 10.5 in (267 mm)
Product Box Length 35.5 in (902 mm)
Product Box Width 13.25 in (337 mm)
Mounting Hardware Included Yes
SPRING 40mm Lift FRONT - 0-300KG LOAD 45MM LIFT REAR
Tough Dog 50mm Raised Height Front Springs (TDC354)
JEEP / WRANGLER / 1996-2007
Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world.
Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it.
Shot peened to relieve stress
Scragged and load tested
Formed on precision mandrels
Hot formed to maintain spring memory
Powder-coated for looks and corrosion resistance
E height up to 6” lift available
40mm Lift Spring Suits up to Bullbar (45mm Lift)
Jeep Wrangler 10/1996 - 2007 TJ Up to Bullbar - FRONT - 45mm Lift
Tough Dog rear springs with 45mm raised height. (sold in pairs)
The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring
0-300Kg Load (45Mm Lift)
From Concept to Reality… Building off the radical design of “The LEGEND”. The GRUMPER offers a revolutionary combination of both grille and winch bumper. Fully Customizable with 4 removable inserts, this aggressive yet sophisticated piece is sure to change the way we look at bumpers going forward for the Jeep JK. Available in Stubby and Full Width Version
Materials: 11 ga. U.S. Steel Construction
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight: Weight: 175 lbs.
Application: 2007-2018 Jeep JK Wrangler
Added Windshield Protection.
11 Ga. U.S. Steel Construction.
2 Stage Black Powder Coat.
Us Patent #D775,014, D775,015.
Angry Eye Headlight Cutouts.
Winch Ready For Warn Zeon 10.
Fully Customizable, 4 Removable Inserts For Different Color Options.
Combines Both Grille And Bumper.
Provides Greater Tire Clearance.
Simple And Quick Installation.
4W-BD1068T SHOCKS 35MM NITRO GAS FRONT
JEEP / WRANGLER / 1996-2007
35Mm Nitro Gas Shock Absorber
Tough Dog front 35mm twin tube nitrogen Gas shock absorbers which are suitable for standard to 35mm raised height. (sold in pairs)
The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's
* 35mm bore size.
* Low pressure gas design for comfort and reduced fade.
* Double chrome plated shaft.
* High temperature resistant fluid.
* Standard and long travel options.
* Weight: 3.0 kg
4W-BD1443T SHOCKS 35MM NITRO GAS REAR
JEEP / WRANGLER / 1996-2007
35mm Internal Bore and piston with twin tube design
Low Pressure Nitrogen Gas to eliminate fade for better performance and comfortable ride
Double chrome-plated shaft
High temperature resistant fluid
Custom made for each 4WD up to Hilux size
OEM or longer length shocks to suit standard or raised 4WD for maximum articulation, comfort safety & durability
JK FRONT FENDER SYSTEM
The Fab Fours’ Front Fender Replacement System focuses on aggressive styling, ease of installation, and modularity. A complete bolt on system with optional parts that adds greater tire clearance. All parts are 100% U.S. steel and manufactured here in South Carolina, USA.
*Modular Design (Optional Flare Widths and Inner Fender)
Provides Greater Tire Clearance
Completely Bolt-On Installation
LED Parking/Turn Lamp inlcuded with Base Fender (JK1000-1)
Removable skin included with Base Fender (JK1000-1)
Works with Stock Latches Only
*All Flare options require Base Fender.
Optional-High Arching Fender Flare (JK1003-1)
Optional- Full Width Flare (JK1006-1)
Optional- 16 Gauge Steel Inner Fender( JK1002-1) May not work with over-sized Shocks or Coil-Overs