( 4W-TDR1114) 4W-TDR1114 SHOCK ABSORBERS 53MM NON ADJUSTABLE REAR

TOYOTA / LANDCRUISER / 1998-UP

DESCRIPTION The Tough Dog ‘Ralph’ shock is the largest 4WD shock on the market. We redesigned shocks originally intended for prime movers to suit 4WD applications. The Ralph shock has a massive 53mm bore and 22mm chrome piston rod, all housed in a 70mm casing. These big dogs carry so much oil, they will run cool over even the toughest of terrain. If you drive a fully laden off road tourer, these are the shocks for you. Huge 53mm bore Twin tube design High temperature, all weather oil 22mm double chrome-plated rod Additional welding on all studs & eye rings Multi stage Velocity Sensitive Valving Rod wiper seal and multi lip seal Hydraulic rebound stop COMPATIBILITY Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR - suits up to 25mm Lift Toyota Landcruiser 11/2007+ 200 Series - REAR - suits up to 20mm Lift Toyota Landcruiser 11/2007+ 200 Series - Armoured - REAR - suits up to 20mm Lift

DESCRIPTION
Designed to reduce tail shaft angle and remove driveline vibration that arises from an out-of-phase drivetrain. The universal joints in a vehicle’s tailshaft must operate at the same angle to operate harmoniously. If the angle of one universal joint is different to the other, or the universal joints are forced to operate on an angle larger that within tolerance, the resulting vibration can be felt through the vehicle when driven. To restore the universal joints to harmony, Tough Dog spacer kits are available for vehicles that commonly suffer from vibration.

COMPATIBILITY

DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.

COMPATIBILITY
Jeep Cherokee 04/1984 - 2001 XJ Limited, Sport - REAR

DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.

SPECIFICATIONS
2 Kits required Upper & Lower

COMPATIBILITY
Nissan Patrol 02/1988 - 1998 GQ (Y60) - 2in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 2in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 3in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 3in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 4in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 4in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 5in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 5in Lift - REAR Nissan Patrol 02/1988 - 11/1997 GQ (Y60) - 6in Lift - REAR Nissan Patrol 12/1997 - 2015 GU (Y61) - 6in Lift - REAR Nissan Patrol 1992 - 2015 GQ, GU Cab Chassis (Coil/Coil) - REAR

( 4W-TDUK-1724/15) 4W-TDUK-1724/15 URETHANE SPRING SPACER 15MM REAR

TOYOTA / LANDCRUISER / 1990-2007

DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 3in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

( 4W-TDUK-1724/30) 4W-TDUK-1724/30 URETHANE SPRING SPACER 30MM REAR

TOYOTA / LANDCRUISER / 1990-2007

DESCRIPTION When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs. SPECIFICATIONS 1 per coil as required COMPATIBILITY Toyota Landcruiser 03/1990 - 2007 80 and 105 Series - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 4in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 5in Lift - REAR Toyota Landcruiser 03/1990 - 2007 80 and 105 Series 6in Lift - REAR Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

( 4W-TOY-027/06) 4W-TOY-027/06 COMPLETE STRUT ASSEMBLY FRONT

TOYOTA / HILUX / 2015-UP

COMPATIBILITY Toyota Hilux 2015+ AN120/130 (Coil/Leaf) Petrol/Diesel/Bar - FRONT

( 4W-TOY-095/1) 4W-TOY-095/1 COMPLETE STRUT ASSEMBLY FRONT

TOYOTA / PRADO / 1996-2003

COMPATIBILITY Toyota Prado 07/1996 - 2003 95 Series All with/Diesel/Bar - FRONT

Mantic Clutch Set For Toyota Land Cruiser 100 Series

Mantic Clutch Set For Nissan Patrol

Clutch Set Toyota Hilux / 4 Runner 03/2005 to GGN15 5 Speed 4.0L MPFI 1GR-FE

Mantic Clutch Set For Jeep Wrangler Jk

7 Color Tachometer
Size: 3.75"

90 Degree Hose
Size: 2.5" To 3"

90 Degree Hose
Size: 2" To 2.5"

90 DEGREE HOSE 2.5",112MM,BLUE

90 DEGREE HOSE 3" 119mm BLUE

90 DEGREE HOSE 4",132MM,BLUE

90 DEGREE REDUSER 3.0"/4" 90mm BLUE

Access 3-Bike Tow Ball Carrier

Aero Motive Stealth Electric Fuel Pumps Are Designed To Provide Your Ride With The Fuel It Needs To Own The Road Or The Track. They Feature A Compact, Lightweight Design That Will Bolt Into Most Existing Hanger Assemblies, Making Them An Easy Upgrade To Your Fuel System. These Versatile Fuel Pumps Utilize A Turbine Pumping Mechanism That Increases Durability And Can Be Used In Most Pulse Modulated Applications. Don'T Settle For Lesser Fuel Pumps; Feed Your Engine With Aero Motive'S Stealth Fuel Pumps.

Aeromotive Fuel Pump Intake

With three layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, "oil-free" conical performance filter provides maximum convenience and easy maintenance with excellent airflow. Washable and reusable for multiple cleanings, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter.

This intake system produces up to 8HP and 12lbs. x ft. torque and outflows the factory intake by 97%. Enclosed in a durable 18 gauge, powder-coated heat shield, this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating roto-molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Mounts In Factory Location:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

Durable 18-Gauge Heat Shield- This wrinkle black powder-coated heat shield is made to keep out unwanted engine heat which improves horsepower and torque.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

3-1/2 IN Conical Filter: This intake utilizes a 3-1/2 IN conical Pro DRY S performance air filter. This 3-layer progressive, dry synthetic air filter requires no oil for maximum convenience.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1997-2006 Jeep Wrangler TJ L6 4.0L Gas

Outflows The Factory Intake By Up To 40%. Produces An Additional 14 Horsepower And 17 Lbs. X Ft. Torque Max Gains.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
One-Piece, Black Powder Coated 16-Gauge Heat Shield Uses Factory Mounting Locations.
Heat-Insulating Molded Plastic Tube Replaces The Stock Intake Tract.
This Product Is Not Carb Exempt At This Time And Is Not Legal For Sale In California Or Use On Vehicles Registered With The California Department Of Motor Vehicles.
Black Powder Coated Heat Shield.
Replaces The Factory Intake Box And Uses The Factory Inlet Tube.
This Product Is 50-State Legal (Carb E.O Number D-550-3).

Add more power to your Mustang 5.0L with the aFe Stage-2 performance intake system. This Stage-2 cold air intake system produces 22HP and 27lbs. x ft. torque and outflowed the factory intake by 33%. A one-piece 16 gauge steel, powder-coated heat shield uses an auxiliary air scoop to directly supply cool air from the front of the vehicle straight to the filter for maximum performance. This intake system also features a polished aluminum tube with a built-in MAF pad and is attached to a 3-angle filter adapter to smoothly guide increased air-flow into the engine with minimal restriction. The Pro DRY S media air filter is washable and reusable and is constructed with 100% polyurethane for a long life and multiple cleaning cycles.

8 IN Tall Conical Pro DRY S Air Filter:
This intake utilizes a huge, 8 IN tall conical Pro DRY S performance air filter. This 3-layer progressive, synthetic material air filter requires no oils and cleans with soap and water for maximum convenience.

One-Piece Heat Shield:
The air filter is housed in a one-piece, black powder-coated 16-gauge heat shield and uses a built in auxiliary air scoop to capture cool air from the front of the vehicle for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all brackets and hardware for a hassle-free installation.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Velocity Stack 3-Angle Adapter:
A large 3-angle filter adapter is used to speed up the air flow after the air filter for improved performance and throttle response.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2011-2014 Ford Mustang GT V8 5.0L Gas

Bringing you the next generation of intakes, the Momentum GT sealed air intake system for the 07-08 GM Gas Trucks/SUV's with V8-6.2L engine and equipped with electric fan. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. From the one-piece sealed housing with a built-in sight window, to the massive air filter, roto-molded tube and premium hardware. This system is superior in every way.

Proven Results:
After a rigorous design and testing phase, the results are in. The Momentum GT intake system outflowed the factory intake by 19% and produced 8 additional horsepower and 11 lbs. x ft. torque.

Huge 3-Layer Performance Air Filter:
The Momentum GT is designed around an oil-free, large 9" round 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Unique One-Piece Housing:
The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included if you wish to completely seal the air box.

Roto-mold Tube:
This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Premium Hardware:
Premium stainless steel T-bolt clamps are used to securely mount the high flow air filter to the 1-piece airbox. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Power, Protection and Simplicity.

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2007-2008 Cadillac Escalade GMT900; Also fits EXT & ESV models V8 6.2L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) V8 4.8L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) w/ Electric Fan V8 5.3L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) w/ Electric Fan V8 6.0L Gas
2007-2008 Chevrolet Suburban GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 Chevrolet Suburban GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 Chevrolet Tahoe GMT900 V8 4.8L Gas
2007-2008 Chevrolet Tahoe GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Sierra GMT900 V8 4.8L Gas
2007-2008 GMC Sierra GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Sierra GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 GMC Sierra Denali; GMT900 w/ Electric Fan V8 6.2L Gas
2007-2008 GMC Yukon GMT900 V8 4.8L Gas
2007-2008 GMC Yukon GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Yukon Denali (GMT900) w/ Electric Fan V8 6.2L Gas
2007-2008 GMC Yukon XL GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Yukon XL GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 GMC Yukon XL Denali (GMT900) w/ Electric Fan V8 6.2L Gas

Outflows The Factory Intake By Up To 50% . Produces An Additional 7 Horsepower And 10 Lbs. X Ft. Torque.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
2-Piece Sealed Intake Housing With A Clear Coat Anodized Brushed Aluminum Top.
Heat-Insulating Roto-Molded Plastic Tube Replaces The Stock Intake Tract.

Outflows The Factory Intake By Up To 31% . Produces An Additional 11 Max Horsepower And 23 Lbs. X Ft. Torque.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
Heat-Shielding Molded Plastic Housing With An Auxiliary Inlet Duct And An Attractive Black Aluminum Cover.
Heat-Insulating Molded Plastic Tube Replaces The Stock Intake Tract; Includes 3-Angle Adaptor With A Built In Mass Air Flow Sensor Pad.
This Product Is 50-State Legal (Carb E.O Number D-550-13).

Lower Intake Air Temperatures:
Dynamic Air Scoops (D.A.S.) lower air intake temperatures by forcing more air into the cold air intake system's auxiliary inlet from the front of the vehicle.

Durable LLDPE Construction:
This D.A.S. is constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable

Hassle-Free Installation:
Requiring minor modifications to the OE plastic trim, the D.A.S. is extremely easy to install.

Fits:
Momentum Intake: 51/54/75-76006

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2008-2020 Lexus LX570 V8 5.7L Gas
2012-2020 Toyota Land Cruiser J200, non-US model V8 4.6L Gas
2008-2020 Toyota Land Cruiser J200 V8 5.7L Gas

The Universal Off-Road Canister from aFe Power is the baddest off-road intake on the planet. The huge 15.5 IN conical Pro-GUARD 7 air filter provides maximum protection delivering clean air to your motor. In recent testing, this intake produced 21hp, 36lbs. x ft. torque. The oversized adjustable ram scoop allows for maximum intake volume and a cool intake charge. The cross-linked polypropylene rotomolded plastic canister houses the air filter and protects against debris and extreme weather conditions. The universal clamp mounting system provides easy mounting to almost any buggy or sand rail available. This product was "Off-Road Business" Magazine's 2007 Editors Choice Product of the Year.

Intake Housing Dimensions: 15.5 IN Width, 12.6 IN Total Height, 9.85 IN Barrell Height, 4 IN Inlet Diameter and 5 IN Scoop Diameter.

Scoop Dimensions: 5 IN Inlet Diameter, 5 IN x 6 IN Square Scoop Inlet. 8.97 IN Total Height and 8.5 IN Total Width.

Specifications

Brand
aFe Power

Manufacturer Part Number
51-11172

Manufacturer
AFE POWER

Assembled Product Dimensions (L x W x H)
1.00 x 1.00 x 1.00 Inches

Air / Fuel Ratio Gauge
Size: 2.5"

Air Breather
Color: Red

Air Breather
Color: Blue

Air Breather
Color: Black
AIR BREATHER BLACK (BIG SIZE)

Air Compressor 1 Cyl Red Colour

Air Filter
Color: Blue

Air Filter
Size: 89Mm
Color: Red

Air Filter
Size: 89Mm
Color: Blue

Air Filter
Size: 76Mm
Color: Blue