DESCRIPTION
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.

COMPATIBILITY
Toyota Landcruiser 1998 - 2007 100 Series (IFS) - REAR

The Tough Dog EXT steering damper is our affordable, heavy duty replacement damper.
Designed for mild applications as a replacement damper when the OEM gear just isn’t quite cutting the mustard, this damper will give you control and feeling back in your steering set up. With a 35mm internal bore and our Foam Cell insert to fight against fade in harsh use situations, this damper is the perfect companion for anyone looking to gain a new lease on life from their steering.

uperb road handling characteristics
35mm bore for heavy-duty use
Eliminate shimmy
Large range to suit most 4WD applications

DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number are not CARB exempted or legal for sale in California:

2011-2020 Chrysler 300 3.6L V6
CARB EO Unavailable

2011-2020 Dodge Challenger 3.6L V6
CARB EO Unavailable

2011-2020 Dodge Charger 3.6L V6
CARB EO Unavailable

2011-2014 Dodge Durango 3.6L V6
CARB EO Unavailable

2019c RAM 1500 Classic 3.6L V6
CARB EO Unavailable


2018-2021 Jeep Wrangler JL 3.6L V6
CARB EO Unavailable

2020-2021 Jeep Gladiator JT 3.6L V6
CARB EO Unavailable

2012-2018 Jeep Wrangler JK 3.6L V6
CARB EO Unavailable

2011-2014 Jeep Grand Cherokee 3.6L V6
CARB EO Unavailable

DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

CADILLAC, AVALANCHE
SILVERADO
SIERRA
SUBURBAN, TAHOE
YUKON
2007-2014 Cadillac Escalade 6.2L V8
CARB EO # D-803-7

2007-2014 Cadillac Escalade ESV 6.2L V8
CARB EO # D-803-7

2007-2013 Cadillac Escalade EXT 6.2L V8
CARB EO # D-803-7


2007-2009 Chevrolet Avalanche 1500 6.0L V8
CARB EO # D-803-7

2007-2013 Chevrolet Avalanche 1500 5.3L V8
CARB EO # D-803-7 (2007-2009)

DESCRIPTION
For Use with Oiled Filters: # 5144, # 5152

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters # 5126

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters 5153

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters # 5117, # 5118, # 5122, # 5124, # 5151

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

DESCRIPTION
For Use with Oiled Filters 5113 or 5129

Volant Pre-Filters are factory treated using a proprietary hydrophobic process and are manufactured from the same durable polyester material as their race proven regular style. This unique material contains uniform micron openings that will filter out debris .005 or larger. This pre-filter will prevent splashes of water, mud and sand from saturating your air filter.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 6.0"
Base: 7.5"
Top: 4.75"
Height: 5.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 5.0"
Base: 6.5"
Top: 4.75"
Height: 8.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 5.0"
Top: 4.75"
Height: 8.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

Replacement Filter:
CADILLAC LXR-V 2005-2009 4.6L (Part # 25864151)
Dodge Viper 2003-2006 8.3L (Part # 26083150)

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 5.0"
Top: 3.5"
Height: 7.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 6.0"
Top: 4.75"
Height: 6.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 4.0"
Base: 6.0"
Top: 4.75"
Height: 7.0"
Shape: Round


Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

Cleaning Kit for MaxFlow 5 and Primo Diesel Cotton Gauze Filters (Blue)
Intended for all gas oiled filters, and for diesel oiled blue filters.

Air flow test have proven that cotton-gauze filters flow much more air than paper element filters do. However, when they get dirty, they can clog up and limit air flow. This is one reason why you should clean your air filter with Volant's filter cleaner kit. The kit contains Volant's filter cleaner that loosens and removes dirt trapping capabilities. Volant's filter oil contains a blue dye to easily see where the oil has saturated into the filter, eliminating the common mistake of over oiling the filter. When used correctly, Volant's filter cleaner kit can maintain the life and performance of your Volant high-flow filter and Cool Flow air intake system.

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Throttle Body Spacer Part # 729850
Exhaust Part # 54837


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following:

2015-2020 Ford F-150 5.0L V8
MaxFlow 5 Oiled Filter (CARB EO # D-803-9 2015-17)
DryTech 3D Dry Filter (CARB EO # D-803-9 2015-17)
PowerCore Filter (CARB EO # # D-803-9 2015-17)
*2018+ EO Approval requires Hydrocarbon Absorber Material (HC Trap) which is not available on this intake.

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2007-2008 Ford F-150 4.6L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

2007-2008 Ford F-150 4.2L L6
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Exhaust Part # 54836


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are CARB exempt for the following combinations:.

2015-2020 Ford F-150 EcoBoost 2.7L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2017)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2017)
DryTech Filter (CARB EO #D-803-3 2015-2017)

2015-2016 Ford F-150 EcoBoost 3.5L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2016)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2016)
DryTech Filter (CARB EO #D-803-3 2015-2016)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729850 (2011)
Exhaust Part # 54387



VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2011-2014 Ford F-150 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

2011-2014 Ford F-150 Raptor 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729754

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2009-2010 Ford F-150 5.4L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-4)
PowerCore Filter (CARB EO # D-526-4)

2010 Ford F-150 Raptor 5.4L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-4)
PowerCore Filter (CARB EO # D-526-4)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

VEHICLE FITMENT
2011-2014 Ford F-150 6.2L V8
*CARB EO# D-758, D-803-9

2011-2014 Ford F-150 Raptor 6.2L V8
*CARB EO# D-758, D-803-9

CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.

Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Re-usable High-Performance Filtration Options (DryTech, MaxFlow)
Up to 50,000 miles no maintenance*
98%+ Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
No Maintenance PowerCore Filtration Available for Select Application
Made in the USA

PRODUCT DESCRIPTION
3.0" Cat-Back, Single Side Exit with Single 4.0" Polished Slash Cut Tip
Sport Sound Level

Premium Stainless Steel Construction
Easy Bolt-on Installation
No Welding Needed
Patented No-Drone, Reflective Sound Cancellation (RSC®) Technology
Straight-through Design
Mandrel Bent
All Hardware and Detailed Instructions Included
Proudly Manufactured in Berea, Ohio

VEHICLE FITMENT
2011-2014 Chevrolet Silverado 2500 6.0L V8
Crew Cab/Standard Bed 153.7" Wheelbase

2011-2014 GMC Sierra 2500 6.0L V8
Crew Cab/Standard Bed 153.7" Wheelbase

INSTALLATION

YEARS: 2011, 2012, 2013, 2014

OVERVIEW
Blackhawk Induction™ air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW® synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 9.1 HP @ 5400 RPM
Replacement Filter RU-3107HBK
Air Filter Color Black
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style 71 Series Kits
Intake Pipe Color / Finish Textured Black
Intake Pipe Material Aluminum
CARB EO Number D-269-84
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


Skip to the beginning of the images gallery
OVERVIEW
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 4915 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 3
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10 lb (4.5 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 19.37 HP @ 4500 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.9 lb (4.9 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 23.01 HP @ 3505 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.1 lb (4.6 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Enclosed air box helps protect the filter from heat in the engine bay
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 12.5 HP @ 4630 RPM
Replacement Filter RU-2815
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 3
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 8.09 HP @ 5231 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 13 lb (5.9 kg)
Product Box Height 10.25 in (260 mm)
Product Box Length 36.19 in (919 mm)
Product Box Width 18.13 in (460 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

TOYOTA FJ 2010-2018 0-2.5" LIFT B8 5100 REAR (without reservior)
Lexus GX470 2009-2003, Toyota 4Runner 2020-2003, FJ Cruiser 2014-2007

Product Description

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

JEEP JK 2007-2018, 3.5-4'' LIFT B8 5100
SERIES FRONT, SHORT ARM
SUSPENSION (without reservior)


Product Description

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

Collapsed Length (IN)16.41
Extended Length (IN)27.56
Collapsed Length (MM)416.8
Extended Length (MM)700.0
FinishZinc Plated
ReservoirNo
Body DesignSmooth Body (Non-Coilover)
Body Diameter46mm

CRONY 500W POWER INVERTER

DIGITAL VOLT METER

All Through Bars Come Fully Assembled.
Locks Supplied As Standard.
Load Capacity: 220 Lb / 100 Kg Per Pair.(Subject To Manufacturers Permitted Roof Load Rating).
Weight: Around 7Kg.
Length: T18W - 2X1500Mm Crossbars.
Inlay Load Strips Protect Loads And Control Airflow Over The Bar To Decrease Drag And Wind Noise.
Installs With Vehicle-Specific Smart Foot Fitting Kit (Sold Separately.)

100Kg Maximum Load Rating Per Pair.
1100Mm Crossbar Length.
Racks Attach To Vehicle Via A Custom Made Fitting Kit (Sold Separately).
Versatile System Utilizing Smart-Foot To Fit Most Vehicles.
Lockable & Removable.
Compatible With Prorack Accessories Range.

All Through Bars Come Fully Assembled.
Locks Supplied As Standard.
Load Capacity: 220 Lb / 100 Kg Per Pair.
Length: T16W - 2X1200Mm Crossbars.
Inlay Load Strips Protect Loads And Control Airflow Over The Bar To Decrease Drag And Wind Noise.
Installs With Vehicle-Specific Smart Foot Fitting Kit (Sold Separately.)

Whispbar Flush 115Cm Half

Pack Contains 2 X 750Mm Crossbars With Integrated Feet.
Up To 50% Less Wind Noise Than Other Bars.
Up To 70% Less Drag Than Other Bars.
Compatible With Most Manufacturer’S Accessories Via Standard Size ‘T’ Track.
Locks Included.
Free Key Alike To Existing Whispbar Products.

Pack Contains 2 X 750Mm Crossbars With Integrated Feet.
Up To 50% Less Wind Noise Than Other Bars.
Up To 70% Less Drag Than Other Bars.
Compatible With Most Manufacturer’S Accessories Via Standard Size ‘T’ Track.
Locks Included.
Free Key Alike To Existing Whispbar Products.

Pack Contains 2 X 750Mm Crossbars With Integrated Feet.
Up To 50% Less Wind Noise Than Other Bars.
Up To 70% Less Drag Than Other Bars.
Compatible With Most Manufacturer’S Accessories Via Standard Size ‘T’ Track.
Locks Included.
Free Key Alike To Existing Whispbar Products.

Pack Contains 2 X 750Mm Crossbars With Integrated Feet.
Up To 50% Less Wind Noise Than Other Bars.
Up To 70% Less Drag Than Other Bars.
Compatible With Most Manufacturer’S Accessories Via Standard Size ‘T’ Track.
Locks Included.
Free Key Alike To Existing Whispbar Products.

Whispbar Flush 95Cm & 100Cm

Whispbar Rail 104-120Cm

Whispbar Rail 98-114Cm