DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number are not CARB exempted or legal for sale in California:

2004-2014 Ford F-150 5.4L V8
CARB EO Unavailable

2010 Ford F-150 Raptor 5.4L V8
CARB EO Unavailable

2005-2010 Ford F-250/F-350 Super Duty 5.4L V8
CARB EO Unavailable

2005-2013 Ford Expedition 5.4L V8
CARB EO Unavailable

2007-2014 Lincoln Navigator 5.4L V8
CARB EO Unavailable

2006-2008 Lincoln Mark LT 5.4L V8
CARB EO Unavailable

Add more power to your Mustang 5.0L with the aFe Stage-2 performance intake system. This Stage-2 cold air intake system produces 22HP and 27lbs. x ft. torque and outflowed the factory intake by 33%. A one-piece 16 gauge steel, powder-coated heat shield uses an auxiliary air scoop to directly supply cool air from the front of the vehicle straight to the filter for maximum performance. This intake system also features a polished aluminum tube with a built-in MAF pad and is attached to a 3-angle filter adapter to smoothly guide increased air-flow into the engine with minimal restriction. The Pro DRY S media air filter is washable and reusable and is constructed with 100% polyurethane for a long life and multiple cleaning cycles.

8 IN Tall Conical Pro DRY S Air Filter:
This intake utilizes a huge, 8 IN tall conical Pro DRY S performance air filter. This 3-layer progressive, synthetic material air filter requires no oils and cleans with soap and water for maximum convenience.

One-Piece Heat Shield:
The air filter is housed in a one-piece, black powder-coated 16-gauge heat shield and uses a built in auxiliary air scoop to capture cool air from the front of the vehicle for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all brackets and hardware for a hassle-free installation.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Velocity Stack 3-Angle Adapter:
A large 3-angle filter adapter is used to speed up the air flow after the air filter for improved performance and throttle response.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2011-2014 Ford Mustang GT V8 5.0L Gas

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.



MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 15.31 HP @ 6000 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.3 lb (4.7 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


Skip to the beginning of the images gallery
OVERVIEW
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 4915 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 3
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10 lb (4.5 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2007-2008 Ford F-150 4.6L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

2007-2008 Ford F-150 4.2L L6
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Throttle Body Spacer Part # 729850
Exhaust Part # 54837


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following:

2015-2020 Ford F-150 5.0L V8
MaxFlow 5 Oiled Filter (CARB EO # D-803-9 2015-17)
DryTech 3D Dry Filter (CARB EO # D-803-9 2015-17)
PowerCore Filter (CARB EO # # D-803-9 2015-17)
*2018+ EO Approval requires Hydrocarbon Absorber Material (HC Trap) which is not available on this intake.

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Exhaust Part # 54836


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are CARB exempt for the following combinations:.

2015-2020 Ford F-150 EcoBoost 2.7L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2017)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2017)
DryTech Filter (CARB EO #D-803-3 2015-2017)

2015-2016 Ford F-150 EcoBoost 3.5L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2016)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2016)
DryTech Filter (CARB EO #D-803-3 2015-2016)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 19.37 HP @ 4500 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.9 lb (4.9 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 23.01 HP @ 3505 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.1 lb (4.6 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729850 (2011)
Exhaust Part # 54387



VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2011-2014 Ford F-150 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

2011-2014 Ford F-150 Raptor 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets