SELECT YOUR VEHICLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featured Brands
suspension uae, suspension system, suspension dubai
30+ Years of high level experience | Always competent & successful
Wide range of products | Well respected by our clients
Part Number: BNDL_4W-BM401069_4W-BM401463
SHOCKS 40MM 9 STAGE - ADJUSTABLE - FRONT/REAR
/shop/product/bndl-4w-bm401069-4w-bm401463-shocks-40mm-9-stage-adjustable-front-rear-6815Description:
( 4W-BM401069) 4W-BM401069 SHOCKS 40MM ADJUSTABLE FRONT
JEEP / WRANGLER / 2007-2018
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm Adjustable Shock (Suits Up To 40Mm Lift)
( 4W-BM401463) 4W-BM401463 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
JEEP / WRANGLER / 2007-2018
Description The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings 40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )
Part Number: 4W-BM401463
4W-BM401463 SHOCKS 40MM 9 STAGE ADJUSTABLE REAR
/shop/product/4w-bm401463-4w-bm401463-shocks-40mm-9-stage-adjustable-rear-1635Description:
Description
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application.
In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimising aeration and cavitation to maximise the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications.
40mm internal bore
60mm external casing
18mm chrome-plated rod
High temperature, all weather oil
Foam cell
9 Stage external adjustment
Additional welding on all studs and eye rings
40Mm 9 Stage Adjustable Shock (Suits 40Mm Lift )
Part Number: 4W-SS5922-P/S
4W-SS5922-P/S STEERING DAMPERS
/shop/product/4w-ss5922-p-s-4w-ss5922-p-s-steering-dampers-1673472.50 AED 472.50 AED 472.5 AED
450.00 AED
Product not available
Description:
DESCRIPTION
SS5922-P/S 4X4 Steering Damper Tough Dog suits Jeep Grand Cherokee ZG ZJ
Tough Dog Coil Over Return to Centre 4x4 Steering Dampener
Official Tough Dog Dealer.
This Tough Dog RTC (Return to Centre) Steering Stabilizer is a great improvement in the steering performance of your 4x4. A must for anyone going offroad or fitting larger tyres.
Product Type: Tough Dog - Steering Damper
Part Number: 4W-TDC339
4W-TDC339 LWD SPRINGS 300KG LOAD SWB 40MM LIFT REAR
/shop/product/4w-tdc339-4w-tdc339-lwd-springs-300kg-load-swb-40mm-lift-rear-1678390.34 AED 390.34 AED 390.3375 AED
371.75 AED
Product not available
Description:
Constant 300Kg Load Swb (40Mm Lift (Also 0-300Kg For Lwb))
Tough Dog rear springs with 40mm raised height. (sold in pairs)
The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring.
Part Number: 4W-TDUB-020
4W-TDUB-020 U-BOLT KIT
/shop/product/4w-tdub-020-4w-tdub-020-u-bolt-kit-170689.25 AED 89.25 AED 89.25 AED
85.00 AED
Product not available
Description:
DESCRIPTION
When U-bolts are tightened to secure the leaf pack in the vehicle from factory, the metal is stretched as a normal part of this process. It is important that U-bolts be replaced when a suspension system is changed, as a stretched U-bolt has lost its integral strength. The U-bolt will appear tight when re-used, but in fact it isn’t, this puts undue pressure on the centre bolts in the springs, causing them to move or snap which in turn allows the diff to move and the leaves to spread. Tough Dog U-bolts are manufactured using high tensile steel & are designed with the correct length of thread for larger, heavy duty leaf spring packs.
COMPATIBILITY
Jeep Cherokee 04/1984 - 2001 XJ Limited, Sport - REAR
Part Number: 4WD3023
4WD3023 Clutch Set for Jeep Wrangler Jk
/shop/product/4wd3023-4wd3023-clutch-set-for-jeep-wrangler-jk-16492,511.60 AED 892.50 AED 892.5 AED
2,392.00 AED
Product not available
Description:
Mantic Clutch Set For Jeep Wrangler Jk
Part Number: AFE 51-10142
AFE 51-10142 Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter Media
/shop/product/afe-51-10142-afe-51-10142-magnum-force-stage-2-cold-air-intake-system-w-pro-dry-s-filter-media-1967Description:
This intake system produces up to 8HP and 12lbs. x ft. torque and outflows the factory intake by 97%. Enclosed in a durable 18 gauge, powder-coated heat shield, this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating roto-molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Mounts In Factory Location:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
Durable 18-Gauge Heat Shield- This wrinkle black powder-coated heat shield is made to keep out unwanted engine heat which improves horsepower and torque.
Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
3-1/2 IN Conical Filter: This intake utilizes a 3-1/2 IN conical Pro DRY S performance air filter. This 3-layer progressive, dry synthetic air filter requires no oil for maximum convenience.
VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1997-2006 Jeep Wrangler TJ L6 4.0L Gas
Part Number: AFE 51-81252
AFE 51-81252 Magnum Force Stage-2 Si Cold Air Intake With Pro Dry S Filter
/shop/product/afe-51-81252-afe-51-81252-magnum-force-stage-2-si-cold-air-intake-with-pro-dry-s-filter-19811,066.28 AED 1,161.25 AED 1161.2475 AED
1,015.50 AED
Product not available
Description:
Outflows The Factory Intake By Up To 50% . Produces An Additional 7 Horsepower And 10 Lbs. X Ft. Torque.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
2-Piece Sealed Intake Housing With A Clear Coat Anodized Brushed Aluminum Top.
Heat-Insulating Roto-Molded Plastic Tube Replaces The Stock Intake Tract.
Part Number: BIL 24-146708
BIL 24-146708 B8 5100 SERIES-SHOCK ABSORBER 1.5-3'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-146708-bil-24-146708-b8-5100-series-shock-absorber-1-5-3-lift-front-without-reservior-5749559.91 AED 410.64 AED 410.6445 AED
533.25 AED
Product not available
Description:
JEEP JK 2007-2018, 1.5-3'' LIFT B8 5100 SERIES FRONT, SHORT ARM SUSPENSION (without reservior)
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Collapsed Length (IN)14.98
Extended Length (IN)24.63
Collapsed Length (MM)380.6
Extended Length (MM)625.5
Finish Zinc Plated
Reservoir No
Body Design Smooth Body (Non-Coil over)
Body Diameter46mm
Part Number: BIL 24-186995
BIL 24-186995 B8 5100 SERIES-SHOCK ABSORBER 3.5-4'' LIFT FRONT (WITHOUT RESERVIOR)
/shop/product/bil-24-186995-bil-24-186995-b8-5100-series-shock-absorber-3-5-4-lift-front-without-reservior-3186525.00 AED 391.25 AED 391.251 AED
500.00 AED
Product not available
Description:
JEEP JK 2007-2018, 3.5-4'' LIFT B8 5100
SERIES FRONT, SHORT ARM
SUSPENSION (without reservior)
Product Description
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Collapsed Length (IN)16.41
Extended Length (IN)27.56
Collapsed Length (MM)416.8
Extended Length (MM)700.0
FinishZinc Plated
ReservoirNo
Body DesignSmooth Body (Non-Coilover)
Body Diameter46mm
Part Number: BNDL_YK S7W_YK Q20
Bundle of Bundle of YK Jeep Wrangler JK 5 Door SUV 2007 - Apr 2018 S7W Whispbar Flush 105Cm and YK Q20 Q4 Tracks & K450 Kit for Jeep Wrangler JK 5 Door SUV 2007 - Apr 2018
/shop/product/bndl-yk-s7w-yk-q20-bundle-of-bundle-of-yk-jeep-wrangler-jk-5-door-suv-2007-apr-2018-s7w-whispbar-flush-105cm-and-yk-q20-q4-tracks-k450-kit-for-jeep-wrangler-jk-5-door-suv-2007-apr-2018-7032596.40 AED 596.40 AED 596.4 AED
568.00 AED
Product not available
Add to Cart
Description:
( YK S7W) Whispbar Flush 105Cm
Pack Contains 2 X 750Mm Crossbars With Integrated Feet. Up To 50% Less Wind Noise Than Other Bars. Up To 70% Less Drag Than Other Bars. Compatible With Most ManufacturerS Accessories Via Standard Size T Track. Locks Included. Free Key Alike To Existing Whispbar Products.
( YK Q20) Q4 Tracks & K450 Kit
Q4 Tracks & K450 Kit
Part Number: BNDL_YK S7W_YK Q20
Bundle of YK S7W Whispbar Flush 105Cm and YK Q20 Q4 Tracks & K450 Kit for Jeep Wrangler JK 3 Door SUV 2007 - Apr 2018
/shop/product/bndl-yk-s7w-yk-q20-bundle-of-yk-s7w-whispbar-flush-105cm-and-yk-q20-q4-tracks-k450-kit-for-jeep-wrangler-jk-3-door-suv-2007-apr-2018-7031596.40 AED 596.40 AED 596.4 AED
568.00 AED
Product not available
Add to Cart
Description:
( YK S7W) Whispbar Flush 105Cm
Pack Contains 2 X 750Mm Crossbars With Integrated Feet. Up To 50% Less Wind Noise Than Other Bars. Up To 70% Less Drag Than Other Bars. Compatible With Most ManufacturerS Accessories Via Standard Size T Track. Locks Included. Free Key Alike To Existing Whispbar Products.
( YK Q20) Q4 Tracks & K450 Kit
Q4 Tracks & K450 Kit
Part Number: FAB4-JK1003-1
Front Fender Flares
/shop/product/fab4-jk1003-1-front-fender-flares-22082,430.80 AED 1,213.88 AED 1213.884 AED
2,315.05 AED
Product not available
Description:
Fender Flare; Front; Pair; Powder Coated.
Fab Fours Fenders Are Required And Sold Separately.
07-Current Wrangler Jk, 2 & 4 Door.
18-Current Wrangler Jl, 2 & 4 Door.
Jl Wrangler Models Must Use Base Fender: Jl2000-1.
2 Stage Matte Black Powder Coat.
High Arch Design.
Provides Greater Tire Clearance.
16 Gauge Steel Construction.
Cnc Laser Cut.
Brake Formed.
No Drilling Required.
Accommodates Led Parking/Turn Lamp From Base Fender (J1000).
Stainless Steel Hardware.
Weight 40Lbs.
Height: 29 Inch.
Width 22 Inch.
Length: 70 Inch.
100% Made In The U.S.A.
Part Number: FAB4-JK1000-1
Front Replacement Fender
/shop/product/fab4-jk1000-1-front-replacement-fender-22064,723.95 AED 2,235.40 AED 2235.3975 AED
4,499.00 AED
Product not available
Description:
JK FRONT FENDER SYSTEM
JEEP JK
The Fab Fours’ Front Fender Replacement System focuses on aggressive styling, ease of installation, and modularity. A complete bolt on system with optional parts that adds greater tire clearance. All parts are 100% U.S. steel and manufactured here in South Carolina, USA.
PRODUCT DETAILS
*Modular Design (Optional Flare Widths and Inner Fender)
Aggressive Styling
Provides Greater Tire Clearance
Completely Bolt-On Installation
LED Parking/Turn Lamp inlcuded with Base Fender (JK1000-1)
Removable skin included with Base Fender (JK1000-1)
Works with Stock Latches Only
NOTE
*All Flare options require Base Fender.
Optional-High Arching Fender Flare (JK1003-1)
Optional- Full Width Flare (JK1006-1)
Optional- 16 Gauge Steel Inner Fender( JK1002-1) May not work with over-sized Shocks or Coil-Overs
Optional- Gill Box (JK1004-1)
TECH SPECS
Materials: 11 Gauge Steel
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight:
Base Fenders: 50lbs // Inner Fenders: 12 lbs // Mid-width Flares: 40 lbs // Full Width Flares: 55 lbs // Gill Box: 14 lbs
Application: 2007-2018 Jeep JK
Part Number: FAB4-GR1005-1
Grumper Crash Bar Cover
/shop/product/fab4-gr1005-1-grumper-crash-bar-cover-22021,783.95 AED 918.29 AED 918.288 AED
1,699.00 AED
Product not available
Description:
GRUMPER
JEEP JK
From Concept to Reality… Building off the radical design of “The LEGEND”. The GRUMPER offers a revolutionary combination of both grille and winch bumper. Fully Customizable with 4 removable inserts, this aggressive yet sophisticated piece is sure to change the way we look at bumpers going forward for the Jeep JK. Available in Stubby and Full Width Version
TECH SPECS
Materials: 11 ga. U.S. Steel Construction
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight: Weight: 175 lbs.
Application: 2007-2018 Jeep JK Wrangler
PRODUCT DETAILS
Aggressive Design.
Unique Styling.
Added Windshield Protection.
11 Ga. U.S. Steel Construction.
2 Stage Black Powder Coat.
Us Patent #D775,014, D775,015.
Aggressive Design.
Angry Eye Headlight Cutouts.
Winch Ready For Warn Zeon 10.
Fully Customizable, 4 Removable Inserts For Different Color Options.
Combines Both Grille And Bumper.
Provides Greater Tire Clearance.
Simple And Quick Installation.
Part Number: FAB4-GR1000-1
Grumper Front Grill
/shop/product/fab4-gr1000-1-grumper-front-grill-22017,768.95 AED 3,890.25 AED 3890.25 AED
7,399.00 AED
Product not available
Description:
GRUMPER
JEEP JK
From Concept to Reality… Building off the radical design of “The LEGEND”. The GRUMPER offers a revolutionary combination of both grille and winch bumper. Fully Customizable with 4 removable inserts, this aggressive yet sophisticated piece is sure to change the way we look at bumpers going forward for the Jeep JK. Available in Stubby and Full Width Version
PRODUCT DETAILS
**US PAT #D775,014, D775,015**
Aggressive Design
Angry Eye Headlight Cutouts
Winch ready for Warn Zeon 10
Includes 4 removable inserts for optimal customization
Combines both Grille and Bumper
Provides Greater Tire Clearance
Simple and Quick Installation
*Integrated Crash Bar Cover on Full Width Design
NOTE
*Optional Crash Bar Cover for Stubby Bumper: Part# GR1005-1
TECH SPECS
Materials: 11 ga. U.S. Steel Construction
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight: Weight: 175 lbs.
Application: 2007-2018 Jeep JK Wrangler
Part Number: FAB4-GR1010-1
Grumper Full Width Front Bumper
/shop/product/fab4-gr1010-1-grumper-full-width-front-bumper-22038,923.95 AED 4,221.00 AED 4221.0 AED
8,499.00 AED
Product not available
Description:
Grumper Full Width Front Bumper
JEEP JK
From Concept to Reality… Building off the radical design of “The LEGEND”. The GRUMPER offers a revolutionary combination of both grille and winch bumper. Fully Customizable with 4 removable inserts, this aggressive yet sophisticated piece is sure to change the way we look at bumpers going forward for the Jeep JK. Available in Stubby and Full Width Version
PRODUCT DETAILS
Aggressive Design
Angry Eye Headlight Cutouts
Winch ready for Warn Zeon 10
Includes 4 removable inserts for optimal customization
Combines both Grille and Bumper
Provides Greater Tire Clearance
Simple and Quick Installation
*Integrated Crash Bar Cover on Full Width Design
NOTE
*Optional Crash Bar Cover for Stubby Bumper: Part# GR1005-1
TECH SPECS
Materials: 11 ga. U.S. Steel Construction
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight: Weight: 175 lbs.
Application: 2007-2018 Jeep JK Wrangle
Part Number: R1-104.12740
Jeep Wrangler Jk Extended Rear Brake Pads
/shop/product/r1-104-12740-jeep-wrangler-jk-extended-rear-brake-pads-2651296.57 AED 152.03 AED 152.0295 AED
282.45 AED
Product not available
Description:
R1 Concepts Brake Pads Have Been Designed With Both Safety And Durability In Mind. Manufactured For Every Type Of Vehicle And Any Type Of Driving Condition, They Are The Best Choice For Everything From A Fleet Of Employee Vehicles To A Family-Owned Suv. We Understand That The Safety And Maneuverability Of Our Customers' Vehicles Is Of Paramount Importance. Through Our Superior Research, Design, And Development Process, We Are Able To Provide Cost-Effective Automotive Parts That Will Stand The Test Of Time. Our Wide Inventory Of Specialized Products Give Our Customers Exactly What They Need Even For The Heaviest Of Applications.
Part Number: R1-EDS 67068
Jeep Wrangler Jk Extended Rear Disc Brake
/shop/product/r1-eds-67068-jeep-wrangler-jk-extended-rear-disc-brake-2667289.80 AED 208.94 AED 208.9395 AED
276.00 AED
Product not available
Description:
Jeep Wrangler Jk Extended Wear Rear Disc Brake
Part Number: R1-106.12730
Jeep Wrangler Jk Front Brake Pads
/shop/product/r1-106-12730-jeep-wrangler-jk-front-brake-pads-2662362.25 AED 231.58 AED 231.5775 AED
345.00 AED
Product not available
Description:
R1 Concepts Brake Pads Have Been Designed With Both Safety And Durability In Mind. Manufactured For Every Type Of Vehicle And Any Type Of Driving Condition, They Are The Best Choice For Everything From A Fleet Of Employee Vehicles To A Family-Owned Suv. We Understand That The Safety And Maneuverability Of Our Customers' Vehicles Is Of Paramount Importance. Through Our Superior Research, Design, And Development Process, We Are Able To Provide Cost-Effective Automotive Parts That Will Stand The Test Of Time. Our Wide Inventory Of Specialized Products Give Our Customers Exactly What They Need Even For The Heaviest Of Applications.
Part Number: R1-105.12730
Jeep Wrangler Jk Front Brake Pads
/shop/product/r1-105-12730-jeep-wrangler-jk-front-brake-pads-2657348.44 AED 234.55 AED 234.549 AED
331.85 AED
Product not available
Description:
R1 Concepts Brake Pads Have Been Designed With Both Safety And Durability In Mind. Manufactured For Every Type Of Vehicle And Any Type Of Driving Condition, They Are The Best Choice For Everything From A Fleet Of Employee Vehicles To A Family-Owned Suv. We Understand That The Safety And Maneuverability Of Our Customers' Vehicles Is Of Paramount Importance. Through Our Superior Research, Design, And Development Process, We Are Able To Provide Cost-Effective Automotive Parts That Will Stand The Test Of Time. Our Wide Inventory Of Specialized Products Give Our Customers Exactly What They Need Even For The Heaviest Of Applications.
Part Number: R1-PDS 67067
Jeep Wrangler Jk Front Disc Brake
/shop/product/r1-pds-67067-jeep-wrangler-jk-front-disc-brake-2672441.00 AED 274.56 AED 274.5645 AED
420.00 AED
Product not available
Description:
Jeep Wrangler Jk Ceramic Front Disc Brake
Part Number: R1-EDS 67067
Jeep Wrangler Jk Non-Ceramic Front Disc Brake
/shop/product/r1-eds-67067-jeep-wrangler-jk-non-ceramic-front-disc-brake-2666289.80 AED 208.64 AED 208.635 AED
276.00 AED
Product not available
Description:
Jeep Wrangler Jk Non-Ceramic Front Disc Brake
Part Number: R1-PDS 67068
Jeep Wrangler Jk Rear Disc Brake
/shop/product/r1-pds-67068-jeep-wrangler-jk-rear-disc-brake-2673441.00 AED 277.04 AED 277.0425 AED
420.00 AED
Product not available
Description:
Jeep Wrangler Jk Non-Ceramic Rear Disc Brake
Part Number: K&N 63-1566
K&N 63-1566 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-1566-k-n-63-1566-k-n-performance-air-intake-system-2302Description:
OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 12.2 HP @ 5600 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.8 lb (4.9 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 63-1576
K&N 63-1576 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-63-1576-k-n-63-1576-k-n-performance-air-intake-system-3208Description:
OVERVIEW
An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Enclosed air box helps protect the filter from heat in the engine bay
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 12.5 HP @ 4630 RPM
Replacement Filter RU-2815
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 3
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Part Number: K&N 71-1576
K&N 71-1576 K&N PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-71-1576-k-n-71-1576-k-n-performance-air-intake-system-32131,916.51 AED 1,247.83 AED 1247.8305 AED
1,825.25 AED
Product not available
Description:
OVERVIEW
Blackhawk Induction™ air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW® synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
MORE INFORMATION
Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
SPECIFICATIONS
Estimated Horsepower Gain 9.1 HP @ 5400 RPM
Replacement Filter RU-3107HBK
Air Filter Color Black
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style 71 Series Kits
Intake Pipe Color / Finish Textured Black
Intake Pipe Material Aluminum
CARB EO Number D-269-84
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
Mounting Hardware Included Yes
Part Number: K&N AIR-311-132
K&N AIR-311-132 AIRAID PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-air-311-132-k-n-air-311-132-airaid-performance-air-intake-system-5350Description:
OVERVIEW
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
MORE INFORMATION
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box (where applicable)
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media
SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 5000 RPM
Replacement Filter 701-462
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 8
Clamp Material Steel
Clamp Style Spring
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-19
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 11.6 lb (5.3 kg)
Product Box Height 15.6 in (396 mm)
Product Box Length 19.9 in (505 mm)
Product Box Width 15.6 in (396 mm)
Mounting Hardware Included Yes
VEHICLE APPLICATIONS
Supported Vehicles
2017 Jeep Wrangler 3.6L V6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-19
TUV Approved (Europe): No
2016 Jeep Wrangler 3.6L V6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-19
TUV Approved (Europe): No
2015 Jeep Wrangler 3.6L V6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-19
TUV Approved (Europe): No
2014 Jeep Wrangler 3.6L V6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-19
TUV Approved (Europe): No
2013 Jeep Wrangler 3.6L V6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-19
TUV Approved (Europe): No
2012 Jeep Wrangler 3.6L V6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-19
TUV Approved (Europe): No
Part Number: K&N AIR-311-158
K&N AIR-311-158 AIRAID PERFORMANCE AIR INTAKE SYSTEM
/shop/product/k-n-air-311-158-k-n-air-311-158-airaid-performance-air-intake-system-2319Description:
Skip to the beginning of the images gallery
OVERVIEW
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
MORE INFORMATION
Increases horsepower and torque
Replaces stock air box, air filter and intake tubing
Cold Air Dam panels block out hot engine bay air
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media
SPECIFICATIONS
Replacement Filter 701-456
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-18
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11.2 lb (5.1 kg)
Product Box Height 10.7 in (272 mm)
Product Box Length 36.3 in (922 mm)
Product Box Width 12.5 in (318 mm)
Mounting Hardware Included Yes
VEHICLE APPLICATIONS
Supported Vehicles
2006 Jeep Wrangler 4.0L L6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-18
TUV Approved (Europe): No
2005 Jeep Wrangler 4.0L L6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-18
TUV Approved (Europe): No
2004 Jeep Wrangler 4.0L L6 Gas
All Models
Street Legal in All US States: Yes
CARB EO Number:
D-609-18
TUV Approved (Europe): No
Part Number: FAB4-JP-Y1251T-1
Rear Bumper Tire Carrier
/shop/product/fab4-jp-y1251t-1-rear-bumper-tire-carrier-22122,833.95 AED 1,299.38 AED 1299.375 AED
2,699.00 AED
Product not available
Description:
TIRE CARRIER
JEEP JK
The Fab Fours’ Tire Carrier focuses on unique styling and superior strength.
PRODUCT DETAILS
Requires Base Bumper (JK07-Y1251-1)
Heavy Duty custom machined and plated pivot shaft in a double sheer fabricated mount
Max tire size tested is 40″ (Fully adjustable for different wheel heights and offsets)
Swing Away Design
NOTE:
Optional Hi-Lift Jack Mount Part# M1450-1
TECH SPECS
Materials: 3/16″ Steel Construction and 11 gauge steel plates.
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight: 67 lbs.
Application: 2007-2018 Jeep JK
Part Number: FAB4-JK1005-1
Rear Fender Flares
/shop/product/fab4-jk1005-1-rear-fender-flares-22101,712.60 AED 931.93 AED 931.9275 AED
1,631.05 AED
Product not available
Description:
Fender Flare; Rear; Pair; Powder Coated.
Fab Fours Fenders Required And Sold Separately.
07-Current Wrangler Jk, 4-Door.
18-Current Wrangler Jl, 4-Door.
Jl Wrangler Models Must Use Base Fender: Jl2001-1.
2 Stage Matte Black Powder Coat.
High Arch Design.
Provides Greater Tire Clearance And Allows For Larger Tire.
11 Gauge Steel Construction.
Cnc Laser Cut.
Brake Formed.
No Drilling Required.
Stainless Steel Hardware.
Weight 25Lbs.
Height: 18 Inch.
Width 12 Inch.
Length: 70 Inch.
100% Made In The U.S.A.
Sold As A Pair.
Part Number: FAB4-JK1001-1
Rear Replacement Fender
/shop/product/fab4-jk1001-1-rear-replacement-fender-22072,949.50 AED 1,509.48 AED 1509.48 AED
2,809.05 AED
Product not available
Description:
REAR FENDER
JEEP JK
From Concept to Reality… Building off the radical design of “The LEGEND”. The Fab Fours’ Rear Fender Replacement System focuses on aggressive styling, ease of installation, and modularity. A complete bolt on system with optional parts that adds greater tire clearance and allows you to run a larger tire. All parts are 100% U.S. steel and manufactured here in South Carolina, USA.
PRODUCT DETAILS
Rear Fenders fit 4 door only
Modular Design
Aggressive Styling
Provides Greater Tire Clearence
Allows for Larger Tire
Rear Fender Base (JK1001-1) includes 16 gauge removable skin
Optional – Rear High Arching Fender Flare ( JK1005-1)
*All Flare options require Base Fender.*
TECH SPECS
Materials: Base Fender, Fender Flare-11 Gauge Steel / Removable Fender Skin- 16 Gauge Steel
Finish: 2 Stage Matte Black Powder Coat w/ epoxy primer
Size/Weight: Length: 38″ / Height: 12″ / Width: 6″ / Weight:16 Lbs
Application: 2007-2018 Jeep JK Wrangler
Part Number: BNDL_YK K324_YK S18W
Set of YK K324 Fitting Kit Xl and YK S18W Whispbar Through 149Cm for Jeep Wrangler JL 3 Door SUV May 2019 -2022
/shop/product/bndl-yk-k324-yk-s18w-set-of-yk-k324-fitting-kit-xl-and-yk-s18w-whispbar-through-149cm-for-jeep-wrangler-jl-3-door-suv-may-2019-2022-7033527.10 AED 527.10 AED 527.1 AED
502.00 AED
Product not available
Add to Cart
Description:
( YK K324) Fitting Kit Xl
Set Of 4. Fit Kits Are Specific To Vehicles, Ensuring Secure, Stable Attachment Of The Whispbar Base Rack To Your Vehicle. Easy To Install And Remove From Your Vehicle. For Use With The Whispbar Base Rack System. Clamps Onto Vehicle Roof Gutter. 75Kg Load Rating.
( YK S18W) Whispbar Through 149Cm
Aerodynamic Design Results In Almost No Wind Noise. Preassembly Of The Major System Components Is Done At The Factory, Making Installation On Your Vehicle A Breeze. Locks Are Included. Typical Weight Limit Of 165 Pounds, But May Be Less For Your Vehicle. The Innovative Smart Foot System Adapts And Transfers Simply To Virtually Any Vehicle, Making It Easy And Inexpensive To Reuse Your S18 System On A Different Vehicle. Compatible With Thule And Yakima Accessories Made To Attach To 'Factory Bars', Along With Other Thule Accessories Using The Xadapt9 (Sold Separately), Or With Other Yakima Accessories Using The Horizontal Mighty Mount 32H (Sold Separately). Includes 2 X 1490Mm Aluminum Bars, 4 Smart Feet, 4 Rubber Pads, Instructions And Tools Required To Complete Assembly. A Yakima Whispbar Fit Kit, Specific To Your Vehicle, Is Required To Complete The Base Rack System.
Part Number: BNDL_YK K324_YK S18W
Set of YK K324 Fitting Kit Xl and YK S18W Whispbar Through 149Cm for Jeep Wrangler JL 5 Door SUV May 2019 -2022
/shop/product/bndl-yk-k324-yk-s18w-set-of-yk-k324-fitting-kit-xl-and-yk-s18w-whispbar-through-149cm-for-jeep-wrangler-jl-5-door-suv-may-2019-2022-7034527.10 AED 527.10 AED 527.1 AED
502.00 AED
Product not available
Add to Cart
Description:
( YK K324) Fitting Kit Xl
Set Of 4. Fit Kits Are Specific To Vehicles, Ensuring Secure, Stable Attachment Of The Whispbar Base Rack To Your Vehicle. Easy To Install And Remove From Your Vehicle. For Use With The Whispbar Base Rack System. Clamps Onto Vehicle Roof Gutter. 75Kg Load Rating.
( YK S18W) Whispbar Through 149Cm
Aerodynamic Design Results In Almost No Wind Noise. Preassembly Of The Major System Components Is Done At The Factory, Making Installation On Your Vehicle A Breeze. Locks Are Included. Typical Weight Limit Of 165 Pounds, But May Be Less For Your Vehicle. The Innovative Smart Foot System Adapts And Transfers Simply To Virtually Any Vehicle, Making It Easy And Inexpensive To Reuse Your S18 System On A Different Vehicle. Compatible With Thule And Yakima Accessories Made To Attach To 'Factory Bars', Along With Other Thule Accessories Using The Xadapt9 (Sold Separately), Or With Other Yakima Accessories Using The Horizontal Mighty Mount 32H (Sold Separately). Includes 2 X 1490Mm Aluminum Bars, 4 Smart Feet, 4 Rubber Pads, Instructions And Tools Required To Complete Assembly. A Yakima Whispbar Fit Kit, Specific To Your Vehicle, Is Required To Complete The Base Rack System.
Part Number: BNDL_BIL 25-187656_BIL 25-187663
SHOCK ABSORBER 1.5-3'' LIFT (WITH RESERVIOR) B8 5160 SERIES- FRONT/REAR
/shop/product/bndl-bil-25-187656-bil-25-187663-shock-absorber-1-5-3-lift-with-reservior-b8-5160-series-front-rear-6867Description:
( BIL 25-187656) BIL 25-187656 B8 5160 SERIES-SHOCK ABSORBER 1.5-3'' LIFT FRONT (WITH RESERVIOR)
JEEP / WRANGLER JK / 2007-2018
JEEP JK 2007-2018 1.5-3" LIFT B8 5160 SERIES FRONT, SHORT ARM SUSPENSION (with reservior) Product Description Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments. Collapsed Length (IN)14.53 Extended Length (IN)24.70 Collapsed Length (MM)369.0 Extended Length (MM)627.5 Finish Zinc Plated Reservoir Yes Body Design Smooth Body (Non-Coil over) Body Diameter46mm
( BIL 25-187663) BIL 25-187663 B8 5160 SERIES-SHOCK ABSORBER 1.5-3'' LIFT REAR (WITH RESERVIOR)
JEEP / WRANGLER JK / 2007-2018
JEEP JK 2007-2018 1.5-3" LIFT B8 5160 SERIES REAR, SHORT ARM SUSPENSION (with reservior) Product Description Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments. Collapsed Length (IN)14.95 Extended Length (IN)25.00 Collapsed Length (MM)379.7 Extended Length (MM)635.0 Finish Zinc Plated Reservoir Yes Body Design Smooth Body (Non-Coil over) Body Diameter46mm
Part Number: BNDL_BIL 24-146708_BIL 24-146715
SHOCK ABSORBER 1.5-3'' LIFT (WITHOUT RESERVIOR) B8 5100 SERIES- FRONT/REAR
/shop/product/bndl-bil-24-146708-bil-24-146715-shock-absorber-1-5-3-lift-without-reservior-b8-5100-series-front-rear-6866Description:
( BIL 24-146708) BIL 24-146708 B8 5100 SERIES-SHOCK ABSORBER 1.5-3'' LIFT FRONT (WITHOUT RESERVIOR)
JEEP / WRANGLER JK / 2007-2018
JEEP JK 2007-2018, 1.5-3'' LIFT B8 5100 SERIES FRONT, SHORT ARM SUSPENSION (without reservior) Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort. Collapsed Length (IN)14.98 Extended Length (IN)24.63 Collapsed Length (MM)380.6 Extended Length (MM)625.5 Finish Zinc Plated Reservoir No Body Design Smooth Body (Non-Coil over) Body Diameter46mm
( BIL 24-146715) BIL 24-146715 B8 5100 SERIES-SHOCK ABSORBER 1.5-3'' LIFT REAR (WITHOUT RESERVIOR)
JEEP / WRANGLER JK / 2007-2018
JEEP JK 2007-2018, 1.5-3'' LIFT B8 5100 SERIES REAR, SHORT ARM SUSPENSION (without reservior) Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort. Collapsed Length (IN)15.39 Extended Length (IN)25.00 Collapsed Length (MM)390.8 Extended Length (MM)635.0 FinishZinc Plated ReservoirNo Body DesignSmooth Body (Non-Coilover) Body Diameter46mm
Part Number: BNDL_BIL 24-141727_BIL 24-141734
SHOCK ABSORBER STOCK HEIGHT (WITHOUT RESERVIOR) B6 4600 - FRONT/REAR
/shop/product/bndl-bil-24-141727-bil-24-141734-shock-absorber-stock-height-without-reservior-b6-4600-front-rear-6865Description:
( BIL 24-141727) BIL 24-141727 B6 4600 - SHOCK ABSORBER STOCK HEIGHT FRONT (WITHOUT RESERVIOR)
JEEP / WRANGLER JK / 2007-2018
Jeep Wrangler 2017-2007, Wrangler JK 2018 Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
( BIL 24-141734) BIL 24-141734 B6 4600 - SHOCK ABSORBER STOCK HEIGHT REAR (WITHOUT RESERVIOR)
JEEP / WRANGLER JK / 2007-2018
JEEP JK 2007-2018 STOCK HEIGHT B6 4600 SERIES REAR 4DR, 4X4/4X2 Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Part Number: BNDL_4W-BD1068T_4W-BD1443T
SHOCK NITRO GAS 35MM NON ADJUSTABLE FRONT-REAR
/shop/product/bndl-4w-bd1068t-4w-bd1443t-shock-nitro-gas-35mm-non-adjustable-front-rear-68161,890.00 AED 829.50 AED 829.5 AED
1,800.00 AED
Product not available
Add to Cart
Description:
( 4W-BD1068T) 4W-BD1068T SHOCKS 35MM NITRO GAS FRONT
JEEP / WRANGLER / 1996-2007
35Mm Nitro Gas Shock Absorber Tough Dog front 35mm twin tube nitrogen Gas shock absorbers which are suitable for standard to 35mm raised height. (sold in pairs) The Tough Dog 35mm Gas Shock Absorbers have been designed with comfort and control in mind, equipped with velocity sensitive valving they will adjust automatically to road conditions. Ideal for light and medium duty 4WD's Features include: * 35mm bore size. * Low pressure gas design for comfort and reduced fade. * Double chrome plated shaft. * High temperature resistant fluid. * Standard and long travel options. * Weight: 3.0 kg
( 4W-BD1443T) 4W-BD1443T SHOCKS 35MM NITRO GAS REAR
JEEP / WRANGLER / 1996-2007
PRODUCT DESCRIPTION Features 35mm Internal Bore and piston with twin tube design Low Pressure Nitrogen Gas to eliminate fade for better performance and comfortable ride Double chrome-plated shaft High temperature resistant fluid Custom made for each 4WD up to Hilux size OEM or longer length shocks to suit standard or raised 4WD for maximum articulation, comfort safety & durability
Part Number: AFE 46-35001
Silver Bullet Throttle Body Spacer
/shop/product/afe-46-35001-silver-bullet-throttle-body-spacer-1959Description:
Silver Bullet throttle body spacers create turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable 6061-T6 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Serrated/Helix Design:
The Serrated/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with Helix only designs.
6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are constructed from 6061-T6 billet aluminum precision machined for lightweight, high strength and perfect fit and finish.
Longer Intake Track:
Adding a Silver Bullet Throttle Body spacer lengthens the intake track which helps increasing intake air speed increasing performance and improved throttle response
VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1991-2001 Jeep Cherokee XJ L6 4.0L Gas
1999-2004 Jeep Grand Cherokee L6 4.0L Gas
1997-2006 Jeep Wrangler TJ L6 4.0L Gas
1997-2006 Jeep Wrangler TJ Sahara L6 4.0L Gas
1991-1995 Jeep Wrangler YJ L6 4.0L Gas
Part Number: BNDL_4W-TDC354_4W-TDC355
SPRING 40mm Lift FRONT - 0-300KG LOAD 45MM LIFT REAR
/shop/product/bndl-4w-tdc354-4w-tdc355-spring-40mm-lift-front-0-300kg-load-45mm-lift-rear-68171,533.00 AED 829.50 AED 829.5 AED
1,460.00 AED
Product not available
Add to Cart
Description:
( 4W-TDC354) Tough Dog 50mm Raised Height Front Springs (TDC354)
JEEP / WRANGLER / 1996-2007
DESCRIPTION Tough Dog coil springs are designed and manufactured in Australia to exacting standards to stand up to some of the harshest conditions found anywhere in the world. Made from German X5K spring steel, our coils can be designed with less material while maintaining superior ride quality & load carrying characteristics. The spring retains its original memory even after heavy loading. The result? A lighter, tougher coil that can handle just about anything you can throw at it. Shot peened to relieve stress Scragged and load tested Formed on precision mandrels Hot formed to maintain spring memory Powder-coated for looks and corrosion resistance E height up to 6” lift available SPECIFICATIONS 40mm Lift Spring Suits up to Bullbar (45mm Lift) COMPATIBILITY Jeep Wrangler 10/1996 - 2007 TJ Up to Bullbar - FRONT - 45mm Lift
( 4W-TDC355) 4W-TDC355 SPRINGS 0-300KG LOAD 45MM LIFT REAR
JEEP / WRANGLER / 1996-2007
Tough Dog rear springs with 45mm raised height. (sold in pairs) The Tough Dog coil springs are designed and manufactured in Australia, and in most cases use the new generation X5K steel in the manufacturing process. An extremely high quality coil spring 0-300Kg Load (45Mm Lift)
Part Number: FAB4-M1450-1
Tire Hi-Lift Jack Mount Needs
/shop/product/fab4-m1450-1-tire-hi-lift-jack-mount-needs-2213424.25 AED 233.24 AED 233.2365 AED
404.05 AED
Product not available
Description:
OFF-THE-DOOR TIRE CARRIER
JEEP JK
Our Off-The-Door Tire Carrier is the first ever “5-Point” system for maximum strength and durability.
PRODUCT DETAILS
Requires Base Bumper (JK07-Y1251-1)
Heavy duty custom machined and plated pivot shaft in double sheer fabricated mount.
First ever “5-Point” Off-The-Door Tire Carrier.
Double saddle for the tube to rest in custom injection molded Fab Fours parts.
Double turnbuckle at the top and bottom to eliminate any rotational vibration.
Max tire size tested is 40″ (fully adjustable tire mount)
*Designed to accept optional “add-on” parts (see notes)
NOTE:
*Optional 3rd Brake Light Part# M2050-1
*Optional- High-Lift Jack Mount Part#M2150-1
*Optional Air Compressor/Yeti Mount Part#JK2040-1 : Fits the 35 Quart Yeti Cooler // Designed to mount a VIAIR’s Dual 444C OBA air compressor // Tool box tray for extra storage (Straps slots included). This mount will require Optional 3rd Brake Light Part #M4050-1
TECH SPECS
Materials: 3/16″ Steel Construction and 11 gauge steel plates.
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight: 67 lbs.
Application: 2007-2018 Jeep JK
Part Number: TMG CORSA 44411
TMG CORSA 44411 POWERCORE FILTER CLOSED BOX AIR INTAKE
/shop/product/tmg-corsa-44411-tmg-corsa-44411-powercore-filter-closed-box-air-intake-3228Description:
PRODUCT DESCRIPTION
Closed Box Air Intake with PowerCore® Filter
PowerCore® Filter Part # 61513 No Maintenance - No Oil - Dry Replacement Filter Part # 61513
CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.
Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Maintenance Free Donaldson PowerCore® Filter
Up to 150,000 miles or 4 years. No oil needed
99.99% Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
Made in the U.S.A.
VEHICLE FITMENT
2007-2011 Jeep Wrangler JK 3.8L V6
*CARB EO# D-758 (2007-2011)
INSTALLATION
YEARS: 2007, 2008, 2009, 2010, 2011
Part Number: TMG VOL 727636
TMG VOL 727636 THROTTLE BODY SPACER
/shop/product/tmg-vol-727636-tmg-vol-727636-throttle-body-spacer-3255235.73 AED 161.40 AED 161.3955 AED
224.50 AED
Product not available
Description:
DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.
VEHICLE FITMENT & EMISSIONS
This vehicle and part number are not CARB exempted or legal for sale in California:
2011-2020 Chrysler 300 3.6L V6
CARB EO Unavailable
2011-2020 Dodge Challenger 3.6L V6
CARB EO Unavailable
2011-2020 Dodge Charger 3.6L V6
CARB EO Unavailable
2011-2014 Dodge Durango 3.6L V6
CARB EO Unavailable
2019c RAM 1500 Classic 3.6L V6
CARB EO Unavailable
2018-2021 Jeep Wrangler JL 3.6L V6
CARB EO Unavailable
2020-2021 Jeep Gladiator JT 3.6L V6
CARB EO Unavailable
2012-2018 Jeep Wrangler JK 3.6L V6
CARB EO Unavailable
2011-2014 Jeep Grand Cherokee 3.6L V6
CARB EO Unavailable
Part Number: FAB4-JK3020-1
VICOWL JEEP JK 2007-2016
/shop/product/fab4-jk3020-1-vicowl-jeep-jk-2007-2016-22116,193.95 AED 3,135.26 AED 3135.258 AED
5,899.00 AED
Product not available
Description:
VICOWL
JEEP JK
The ViCowl offers unique styling, added front windshield protection and the option for additional lighting. Make your Jeep JK stand out from the rest with the Fab Fours’ ViCowl. **US PATENTED**
PRODUCT DETAILS
**US PATENTED**
Combines Roof Visor and Cowl
Aggressive Design
Unique Styling
Added Windshield Protection
Comes with center insert (Does Not Hold Lights)
Optional: ViCowl 4-Light Insert # JK3021-1 (lights not included)
Optional: ViCowl 20-Inch Light Bar Insert # JK3022-1 (lights not included)
-20 inch light bar insert designed around Rigid Industries E-Series
TECH SPECS
Materials: 11 ga. U.S. Steel Construction
Finish: Fab Fours 2 Stage Black Powder Coat
Size/Weight:
Application: 2007-2018 Jeep JK