DESCRIPTION
Volant throttle-body spacers are designed to provide additional performance with your factory or Volants Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicles throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.


VEHICLE FITMENT & EMISSIONS
This vehicle and part number are not CARB exempted or legal for sale in California:

2011-2020 Chrysler 300 3.6L V6
CARB EO Unavailable

2011-2020 Dodge Challenger 3.6L V6
CARB EO Unavailable

2011-2020 Dodge Charger 3.6L V6
CARB EO Unavailable

2011-2014 Dodge Durango 3.6L V6
CARB EO Unavailable

2019c RAM 1500 Classic 3.6L V6
CARB EO Unavailable


2018-2021 Jeep Wrangler JL 3.6L V6
CARB EO Unavailable

2020-2021 Jeep Gladiator JT 3.6L V6
CARB EO Unavailable

2012-2018 Jeep Wrangler JK 3.6L V6
CARB EO Unavailable

2011-2014 Jeep Grand Cherokee 3.6L V6
CARB EO Unavailable

Outflows The Factory Intake By Up To 50% . Produces An Additional 7 Horsepower And 10 Lbs. X Ft. Torque.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
2-Piece Sealed Intake Housing With A Clear Coat Anodized Brushed Aluminum Top.
Heat-Insulating Roto-Molded Plastic Tube Replaces The Stock Intake Tract.

This intake system produces up to 8HP and 12lbs. x ft. torque and outflows the factory intake by 97%. Enclosed in a durable 18 gauge, powder-coated heat shield, this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating roto-molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Mounts In Factory Location:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

Durable 18-Gauge Heat Shield- This wrinkle black powder-coated heat shield is made to keep out unwanted engine heat which improves horsepower and torque.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

3-1/2 IN Conical Filter: This intake utilizes a 3-1/2 IN conical Pro DRY S performance air filter. This 3-layer progressive, dry synthetic air filter requires no oil for maximum convenience.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1997-2006 Jeep Wrangler TJ L6 4.0L Gas

Skip to the beginning of the images gallery
OVERVIEW
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Increases horsepower and torque
Replaces stock air box, air filter and intake tubing
Cold Air Dam panels block out hot engine bay air
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Replacement Filter 701-456
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-18
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11.2 lb (5.1 kg)
Product Box Height 10.7 in (272 mm)
Product Box Length 36.3 in (922 mm)
Product Box Width 12.5 in (318 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2006 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2005 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2004 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 12.2 HP @ 5600 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.8 lb (4.9 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box (where applicable)
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 5000 RPM
Replacement Filter 701-462
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 8
Clamp Material Steel
Clamp Style Spring
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-19
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 11.6 lb (5.3 kg)
Product Box Height 15.6 in (396 mm)
Product Box Length 19.9 in (505 mm)
Product Box Width 15.6 in (396 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2017 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2016 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2015 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2014 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2013 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2012 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

OVERVIEW
An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Enclosed air box helps protect the filter from heat in the engine bay
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 12.5 HP @ 4630 RPM
Replacement Filter RU-2815
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 3
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
Blackhawk Induction™ air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW® synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 9.1 HP @ 5400 RPM
Replacement Filter RU-3107HBK
Air Filter Color Black
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style 71 Series Kits
Intake Pipe Color / Finish Textured Black
Intake Pipe Material Aluminum
CARB EO Number D-269-84
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
Mounting Hardware Included Yes

PRODUCT DESCRIPTION
Closed Box Air Intake with PowerCore® Filter
PowerCore® Filter Part # 61513 No Maintenance - No Oil - Dry Replacement Filter Part # 61513

CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.

Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Maintenance Free Donaldson PowerCore® Filter
Up to 150,000 miles or 4 years. No oil needed
99.99% Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
Made in the U.S.A.


VEHICLE FITMENT
2007-2011 Jeep Wrangler JK 3.8L V6
*CARB EO# D-758 (2007-2011)

INSTALLATION
YEARS: 2007, 2008, 2009, 2010, 2011