PRODUCT DESCRIPTION
3.0" Cat-Back, Single Side Exit with Single 4.0" Polished Slash Cut Tip
Sport Sound Level

Premium Stainless Steel Construction
Easy Bolt-on Installation
No Welding Needed
Patented No-Drone, Reflective Sound Cancellation (RSC®) Technology
Straight-through Design
Mandrel Bent
All Hardware and Detailed Instructions Included
Proudly Manufactured in Berea, Ohio

VEHICLE FITMENT
2011-2014 Chevrolet Silverado 2500 6.0L V8
Crew Cab/Standard Bed 153.7" Wheelbase

2011-2014 GMC Sierra 2500 6.0L V8
Crew Cab/Standard Bed 153.7" Wheelbase

INSTALLATION

YEARS: 2011, 2012, 2013, 2014

VEHICLE FITMENT
2011-2014 Ford F-150 6.2L V8
*CARB EO# D-758, D-803-9

2011-2014 Ford F-150 Raptor 6.2L V8
*CARB EO# D-758, D-803-9

CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.

Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Re-usable High-Performance Filtration Options (DryTech, MaxFlow)
Up to 50,000 miles no maintenance*
98%+ Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
No Maintenance PowerCore Filtration Available for Select Application
Made in the USA

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729754

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2009-2010 Ford F-150 5.4L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-4)
PowerCore Filter (CARB EO # D-526-4)

2010 Ford F-150 Raptor 5.4L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-4)
PowerCore Filter (CARB EO # D-526-4)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow Diesel Oiled Filter
Filter Part # 61517 5150
Pre-Filter Part # 51921 51906
Filter Maintenance No Maintenance 5100
NOTE: Fits 2012 vehicles with 2 sensors (MAF & ATS), if only 1 sensor (MAF only) use Part # 153666


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following:
NOTE: Fits 2012 vehicles with 2 sensors (MAF & ATS), if only 1 sensor (MAF only) use Part # 153666

2013-2016 Chevrolet Silverado 2500HD 6.6L V8 (LML)
MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

2013-2016 Chevrolet Silverado 3500HD 6.6L V8 (LML)
MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

2013-2016 GMC Sierra 2500HD 6.6L V8 (LML) MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

2013-2016 GMC Sierra 3500HD 6.6L V8 (LML) MaxFlow Diesel Oiled Filter (CARB EO Unavailable)
PowerCore Filter (CARB EO Unavailable)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

PRODUCT DESCRIPTION
Closed Box Air Intake with PowerCore® Filter
PowerCore® Filter Part # 61513 No Maintenance - No Oil - Dry Replacement Filter Part # 61513

CORSA Performance cool air intakes are uniquely engineered to decrease air temperatures, and increase the volume of cold air entering the engine increasing Horsepower, Torque and overall engine performance. Featuring Donaldson PowerCore Filtration Technology, CORSA air filters are warrantied up to 100,000 miles, filters up to 99.99% of engine damaging dirt, dust and debris. CORSA air intakes are proudly designed, engineered and manufactured in the USA.

Outflows Stock Intake Improving Performance
Shields Engine Heat Reducing Airflow Temperatures
Maintenance Free Donaldson PowerCore® Filter
Up to 150,000 miles or 4 years. No oil needed
99.99% Filtration Efficiency*
Pair with a CORSA Exhaust to Maximize Performance
Bolt-On Power, Install in Minutes
No Tune Required. Tune May Enhance Performance
Made in the U.S.A.


VEHICLE FITMENT
2007-2011 Jeep Wrangler JK 3.8L V6
*CARB EO# D-758 (2007-2011)

INSTALLATION
YEARS: 2007, 2008, 2009, 2010, 2011

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100
Throttle Body Spacer Part # 729850 (2011)
Exhaust Part # 54387



VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2011-2014 Ford F-150 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

2011-2014 Ford F-150 Raptor 6.2L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-7, # D-526-9)
PowerCore Filter (CARB EO # D-526-7, # D-526-9)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

OVERVIEW
Blackhawk Induction™ air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW® synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 9.1 HP @ 5400 RPM
Replacement Filter RU-3107HBK
Air Filter Color Black
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style 71 Series Kits
Intake Pipe Color / Finish Textured Black
Intake Pipe Material Aluminum
CARB EO Number D-269-84
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
Mounting Hardware Included Yes

OVERVIEW
An enclosed air box design helps protect the filter and inlet air from the heat of the engine bay, and the air box lid allows for quick and easy access to the filter without tools. A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design of the filter allows you to go up to 100,000 miles between filter services under normal highway driving conditions. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Enclosed air box helps protect the filter from heat in the engine bay
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 12.5 HP @ 4630 RPM
Replacement Filter RU-2815
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 3
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.4 lb (4.7 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

Bringing you the next generation of intakes, the Momentum GT sealed air intake system for the 07-08 GM Gas Trucks/SUV's with V8-6.2L engine and equipped with electric fan. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. From the one-piece sealed housing with a built-in sight window, to the massive air filter, roto-molded tube and premium hardware. This system is superior in every way.

Proven Results:
After a rigorous design and testing phase, the results are in. The Momentum GT intake system outflowed the factory intake by 19% and produced 8 additional horsepower and 11 lbs. x ft. torque.

Huge 3-Layer Performance Air Filter:
The Momentum GT is designed around an oil-free, large 9" round 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Unique One-Piece Housing:
The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included if you wish to completely seal the air box.

Roto-mold Tube:
This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Premium Hardware:
Premium stainless steel T-bolt clamps are used to securely mount the high flow air filter to the 1-piece airbox. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Power, Protection and Simplicity.

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2007-2008 Cadillac Escalade GMT900; Also fits EXT & ESV models V8 6.2L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) V8 4.8L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) w/ Electric Fan V8 5.3L Gas
2007-2008 Chevrolet Silverado 1500 (GMT900) w/ Electric Fan V8 6.0L Gas
2007-2008 Chevrolet Suburban GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 Chevrolet Suburban GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 Chevrolet Tahoe GMT900 V8 4.8L Gas
2007-2008 Chevrolet Tahoe GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Sierra GMT900 V8 4.8L Gas
2007-2008 GMC Sierra GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Sierra GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 GMC Sierra Denali; GMT900 w/ Electric Fan V8 6.2L Gas
2007-2008 GMC Yukon GMT900 V8 4.8L Gas
2007-2008 GMC Yukon GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Yukon Denali (GMT900) w/ Electric Fan V8 6.2L Gas
2007-2008 GMC Yukon XL GMT900 w/ Electric Fan V8 5.3L Gas
2007-2008 GMC Yukon XL GMT900 w/ Electric Fan V8 6.0L Gas
2007-2008 GMC Yukon XL Denali (GMT900) w/ Electric Fan V8 6.2L Gas

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 19.37 HP @ 4500 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.9 lb (4.9 kg)
Product Box Height 14.5 in (368 mm)
Product Box Length 24.1 in (612 mm)
Product Box Width 15.5 in (394 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 23.01 HP @ 3505 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish None
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.1 lb (4.6 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Exhaust Part # 54836


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are CARB exempt for the following combinations:.

2015-2020 Ford F-150 EcoBoost 2.7L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2017)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2017)
DryTech Filter (CARB EO #D-803-3 2015-2017)

2015-2016 Ford F-150 EcoBoost 3.5L Turbo
PowerCore Filter (CARB EO #D-803-3 2015-2016)
MaxFlow 5 Filter (CARB EO #D-803-3 2015-2016)
DryTech Filter (CARB EO #D-803-3 2015-2016)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

his vehicle and part number combinations are exempted on the following Executive Order #:


VEHICLE FITMENT & EMISSIONS

2009-2013 Chevrolet Silverado 1500 4.3L V6
MaxFlow 5 Oiled Filter (CARB EO # D-526-7)
DryTech 3D Dry Filter (CARB EO # D-526-7)
PowerCore Filter (CARB EO # D-526-7)

2009-2013 GMC Sierra 1500 4.3L V6
MaxFlow 5 Oiled Filter (CARB EO # D-526-7)
DryTech 3D Dry Filter (CARB EO # D-526-7)
PowerCore Filter (CARB EO # D-526-7)


INSTALLATION INSTRUCTIONS
Instruction Sheets for Part 15043 - Please note your lid and filter may appear different than images in the instruction sheets

Instruction Sheets for Part 150436 - Please note your lid and filter may appear different than images in the instruction sheets

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a Drytech Dry Filter for improved performance, easy soap and water maintenance, ideal for all cars and trucks
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
Drytech Dry Filter
MaxFlow 5 Oiled Filter
Filter Part # 61513 5160 5119
Pre-Filter Part # 51920 51906
Filter Maintenance No Maintenance Soap & Water 5100
Throttle Body Spacer Part # 729850
Exhaust Part # 54837


VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following:

2015-2020 Ford F-150 5.0L V8
MaxFlow 5 Oiled Filter (CARB EO # D-803-9 2015-17)
DryTech 3D Dry Filter (CARB EO # D-803-9 2015-17)
PowerCore Filter (CARB EO # # D-803-9 2015-17)
*2018+ EO Approval requires Hydrocarbon Absorber Material (HC Trap) which is not available on this intake.

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

Outflows The Factory Intake By Up To 40%. Produces An Additional 14 Horsepower And 17 Lbs. X Ft. Torque Max Gains.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
One-Piece, Black Powder Coated 16-Gauge Heat Shield Uses Factory Mounting Locations.
Heat-Insulating Molded Plastic Tube Replaces The Stock Intake Tract.
This Product Is Not Carb Exempt At This Time And Is Not Legal For Sale In California Or Use On Vehicles Registered With The California Department Of Motor Vehicles.
Black Powder Coated Heat Shield.
Replaces The Factory Intake Box And Uses The Factory Inlet Tube.
This Product Is 50-State Legal (Carb E.O Number D-550-3).

Outflows The Factory Intake By Up To 31% . Produces An Additional 11 Max Horsepower And 23 Lbs. X Ft. Torque.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
Heat-Shielding Molded Plastic Housing With An Auxiliary Inlet Duct And An Attractive Black Aluminum Cover.
Heat-Insulating Molded Plastic Tube Replaces The Stock Intake Tract; Includes 3-Angle Adaptor With A Built In Mass Air Flow Sensor Pad.
This Product Is 50-State Legal (Carb E.O Number D-550-13).

DESCRIPTION
Volant air intake systems utilize a high-velocity venturi filter adapter which provides a smooth transition through the MAF sensor into the intake tube for a much needed airflow improvement over the factory rubber tubing and resonator box. Volant's Cool Air box is larger than the factory unit and incorporates a larger opening to collect a higher volume of colder ambient air.

Filter Options Include:

Choose a PowerCore® for the best filtration on the market with 100,000 Maintenance Free Miles of Driving and perfect for hard conditions
Choose a MaxFlow 5 Oiled Filter for improved performance with the comfort of oiled filtration technology for those looking for horsepower
Filter Type
PowerCore®
MaxFlow 5 Oiled Filter
Filter Part # 61503 5144
Pre-Filter Part # 51922 51905
Filter Maintenance No Maintenance 5100

VEHICLE FITMENT & EMISSIONS
This vehicle and part number combinations are exempted on the following Executive Order #:

2007-2008 Ford F-150 4.6L V8
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

2007-2008 Ford F-150 4.2L L6
MaxFlow 5 Oiled Filter (CARB EO # D-526-5)
PowerCore Filter (CARB EO # D-526-8)

INSTALLATION INSTRUCTIONS
Please note your lid and filter may appear different than images in the instruction sheets

OVERVIEW
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box (where applicable)
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 5000 RPM
Replacement Filter 701-462
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 8
Clamp Material Steel
Clamp Style Spring
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-19
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 11.6 lb (5.3 kg)
Product Box Height 15.6 in (396 mm)
Product Box Length 19.9 in (505 mm)
Product Box Width 15.6 in (396 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2017 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2016 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2015 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2014 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2013 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2012 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.



MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 8.09 HP @ 4717 RPM
Replacement Filter RU-1041
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 7.5 in (191 mm)
Alternate Replacement Filter RF-1041
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 15.2 lb (6.9 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 15.6 in (396 mm)
Product Box Length 24.2 in (615 mm)
Product Box Width 20.2 in (513 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


Skip to the beginning of the images gallery
OVERVIEW
MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 4915 RPM
Replacement Filter RU-5173
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 7
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 3
Product Style 63 Series Aircharger Kits
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10 lb (4.5 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

The Universal Off-Road Canister from aFe Power is the baddest off-road intake on the planet. The huge 15.5 IN conical Pro-GUARD 7 air filter provides maximum protection delivering clean air to your motor. In recent testing, this intake produced 21hp, 36lbs. x ft. torque. The oversized adjustable ram scoop allows for maximum intake volume and a cool intake charge. The cross-linked polypropylene rotomolded plastic canister houses the air filter and protects against debris and extreme weather conditions. The universal clamp mounting system provides easy mounting to almost any buggy or sand rail available. This product was "Off-Road Business" Magazine's 2007 Editors Choice Product of the Year.

Intake Housing Dimensions: 15.5 IN Width, 12.6 IN Total Height, 9.85 IN Barrell Height, 4 IN Inlet Diameter and 5 IN Scoop Diameter.

Scoop Dimensions: 5 IN Inlet Diameter, 5 IN x 6 IN Square Scoop Inlet. 8.97 IN Total Height and 8.5 IN Total Width.

Estimated Horsepower Gain Of 10.25 Hp At 5342 Rpm.
Designed To Improve Throttle Response And Engine Sound.
Easy To Install, Usually In 90 Minutes Or Less.
Replaces Entire Factory Air Intake System.

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 12.2 HP @ 5600 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.8 lb (4.9 kg)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

Skip to the beginning of the images gallery
OVERVIEW
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Increases horsepower and torque
Replaces stock air box, air filter and intake tubing
Cold Air Dam panels block out hot engine bay air
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Replacement Filter 701-456
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-18
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11.2 lb (5.1 kg)
Product Box Height 10.7 in (272 mm)
Product Box Length 36.3 in (922 mm)
Product Box Width 12.5 in (318 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2006 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2005 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2004 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.


MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 8.09 HP @ 5231 RPM
Replacement Filter RU-1042
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 5
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style 63 Series Aircharger Kits
Air Filter Height 6.5 in (165 mm)
Alternate Replacement Filter RF-1042
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 13 lb (5.9 kg)
Product Box Height 10.25 in (260 mm)
Product Box Length 36.19 in (919 mm)
Product Box Width 18.13 in (460 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

OVERVIEW
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.



MORE INFORMATION
Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools


SPECIFICATIONS
Estimated Horsepower Gain 15.31 HP @ 6000 RPM
Replacement Filter RF-1048
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 6
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 2
Product Style 63 Series Aircharger Kits
Air Filter Height 6 in (152 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
Street Legal In All US States No
TUV Approved (Europe) No
Weight 10.3 lb (4.7 kg)
Air Filter Large End Diameter 7.5 in (191 mm)
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes

This intake system produces up to 8HP and 12lbs. x ft. torque and outflows the factory intake by 97%. Enclosed in a durable 18 gauge, powder-coated heat shield, this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating roto-molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Mounts In Factory Location:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

Durable 18-Gauge Heat Shield- This wrinkle black powder-coated heat shield is made to keep out unwanted engine heat which improves horsepower and torque.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

3-1/2 IN Conical Filter: This intake utilizes a 3-1/2 IN conical Pro DRY S performance air filter. This 3-layer progressive, dry synthetic air filter requires no oil for maximum convenience.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1997-2006 Jeep Wrangler TJ L6 4.0L Gas

Add more power to your Mustang 5.0L with the aFe Stage-2 performance intake system. This Stage-2 cold air intake system produces 22HP and 27lbs. x ft. torque and outflowed the factory intake by 33%. A one-piece 16 gauge steel, powder-coated heat shield uses an auxiliary air scoop to directly supply cool air from the front of the vehicle straight to the filter for maximum performance. This intake system also features a polished aluminum tube with a built-in MAF pad and is attached to a 3-angle filter adapter to smoothly guide increased air-flow into the engine with minimal restriction. The Pro DRY S media air filter is washable and reusable and is constructed with 100% polyurethane for a long life and multiple cleaning cycles.

8 IN Tall Conical Pro DRY S Air Filter:
This intake utilizes a huge, 8 IN tall conical Pro DRY S performance air filter. This 3-layer progressive, synthetic material air filter requires no oils and cleans with soap and water for maximum convenience.

One-Piece Heat Shield:
The air filter is housed in a one-piece, black powder-coated 16-gauge heat shield and uses a built in auxiliary air scoop to capture cool air from the front of the vehicle for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all brackets and hardware for a hassle-free installation.

Dyno Tested Intake Tube:
The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.

Velocity Stack 3-Angle Adapter:
A large 3-angle filter adapter is used to speed up the air flow after the air filter for improved performance and throttle response.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2011-2014 Ford Mustang GT V8 5.0L Gas

Outflows The Factory Intake By Up To 50% . Produces An Additional 7 Horsepower And 10 Lbs. X Ft. Torque.
3-Layer Non-Oiled, Washable Synthetic Media For The Perfect Balance Of Performance, Protection And Convenience.
2-Piece Sealed Intake Housing With A Clear Coat Anodized Brushed Aluminum Top.
Heat-Insulating Roto-Molded Plastic Tube Replaces The Stock Intake Tract.

Aero Motive Stealth Electric Fuel Pumps Are Designed To Provide Your Ride With The Fuel It Needs To Own The Road Or The Track. They Feature A Compact, Lightweight Design That Will Bolt Into Most Existing Hanger Assemblies, Making Them An Easy Upgrade To Your Fuel System. These Versatile Fuel Pumps Utilize A Turbine Pumping Mechanism That Increases Durability And Can Be Used In Most Pulse Modulated Applications. Don'T Settle For Lesser Fuel Pumps; Feed Your Engine With Aero Motive'S Stealth Fuel Pumps.

Intake Manifold
Make: Toyota
Model: Land Cruiser
Engine Capacity: 4.5L

Intake Manifold
Make: Nissan
Model: Patrol (Rb 26)

INTAKE MANIFOLD TOYOTA 2JZ (CR

Intake Manifold
Make: Toyota 1Jz

Filter Kit

Serrated/Helix Design:
The Serrated/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with Helix only designs.

6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are constructed from 6061-T6 billet aluminum precision machined for light weight, high strength and perfect fit and finish.

Longer Intake Tract:
Adding a Silver Bullet Throttle Body spacer lengthens the intake tract which helps increasing intake air speed increasing performance and improved throttle response.

Installation Is A Snap:
This Silver Bullet throttle body spacer uses all factory mounting locations providing stability and a hassle-free installation.


VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
1998-2004 Lexus LX470 V8 4.7L Gas
2003-2004 Toyota 4Runner V8 4.7L Gas
1998-2004 Toyota Land Cruiser J100 V8 4.7L Gas
2001-2004 Toyota Sequoia V8 4.7L Gas
2000-2004 Toyota Tundra V8 4.7L Gas

Serrated/Helix Design:

The Serrated/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs.
6061-T6 Billet Aluminum Construction:
All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish.

Installation Is A Snap:
This Silver Bullet throttle body spacer uses all factory mounting locations and a gasket providing stability and a hassle-free installation.

VEHICLE APPLICATIONS
Year Make Model SubModel Engine Fuel
2001-2016 Nissan Patrol (Y61) w/ Manual Trans. I6 4.8L Gas

Cooling System Expansion Tank
1 1/4 Quart Capacity
Billet Aluminum Neck
Accepts A Standard-Size Radiator Cap
Dimensions: 8 In. H X 6 1/2 In. W X 3 In. D
This Tank Comes With A Billet Aluminum Filler Neck. There Is A Barbed Overflow Fitting At The Neck, A 3/8 In.Npt Bung On The Side Of The Tank And A 1/2 In.Npt Bung At The Bottom For Plumbing A Line To The Radiator.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 4.0"
Base: 6.0"
Top: 4.75"
Height: 7.0"
Shape: Round


Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

Waste Gate
Color: Black
WASTE GATE 38 MM

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 5.0"
Base: 6.5"
Top: 4.75"
Height: 8.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

Round Tapered; 6 In (152 Mm) Flange Id; 6 In (152 Mm) Height; 7.5 In (191 Mm) Base; 5 In (127 Mm) Top.
Designed To Increase Horsepower And Acceleration.
Hundreds Of Sizes And Shapes For Most Applications.
High Air Flow With Excellent Filtration.
Clamp-On Washable And Reusable Air Filter.
Pliable Flanges Absorb Vibration And Can Be Stretched Up To 1/16 In. To Fit In-Between Sizes.

X-Stream Top Filter

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 6.0"
Base: 7.5"
Top: 4.75"
Height: 5.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

To Clean, Use our Air Filter Cleaner and Degreaser

Flange ID: 3.5"
Base: 5.0"
Top: 4.75"
Height: 8.0"
Shape: Round
Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This design will allow the highest air flow rate possible and a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Use Volant's two stage cleaning kit to thoroughly clean and re-oil the filter. We recommend cleaning the MaxFlow 5 filter only when necessary. Inspect the filter every 12,00-15,000 miles to ensure peak operation.

Replacement Filter:
CADILLAC LXR-V 2005-2009 4.6L (Part # 25864151)
Dodge Viper 2003-2006 8.3L (Part # 26083150)