SELECT YOUR VEHICLE
Featured Brands
suspension uae, suspension system, suspension dubai
Part Number: BNDL_4W-BMX454900_4W-BMX1114/2
SHOCKS 45MM 9 STAGE - ADJUSTABLE - FRONT/REAR
3,084.00 AED
3,084.00 AED
Product not available
Add to Cart
Description:
( 4W-BMX454900) 4W-BMX454900 SHOCKS 45MM ADJUSTABLE FRONT
TOYOTA / LANDCRUISER / 2007-UP
DESCRIPTION These tough puppies are the largest bore externally adjustable shocks available on the market. There is nothing that can compare to the 45mm bore in a 70mm outer casing. This is one serious shock. The 9 stages of adjustment mean you can control the firmness of your shocks easily, and adapt to the conditions as required. Choose a firmer ride for your highway travels, and then dial them down when it’s time to get down to business. 45mm big bore adjustables are designed for big lift applications up to six inches over factory in some vehicles. Our adjustable shocks are built tough for the Aussie outback. As well as the Foam Cell insert to combat shock fade, the 45mm adjustable also incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. Our big bore shocks also have a DU bushing fitted internally to protect the seals from damage caused by side load at full extension. 45mm internal bore 70mm external casing 22mm chrome plated rod High temperature, all weather oil Foam cell technology 9 Stage external adjustment Additional welding on all studs and eyerings
( 4W-BMX1114/2) 4W-BMX1114/2 SHOCK 45MM 9 STAGE ADJUSTABLE REAR
TOYOTA / LANDCRUISER / 1998-2007
DESCRIPTION Rear Set of 2 Shock Absorber Tough Dog Pair of 45mm Bore Adjustable Shock Absorbers Official Tough Dog Dealer. BIG BORE Adjustable shock absorbers feature a 45mm bore, 70mm external casing, and a 22mm piston rod. Designed to fit heavy duty vehicles especially those with lift kit fitted. With internal DU bushings fitted, these shocks are perfect for all BIG LIFT, OFFROAD work.
Part Number: BNDL_4W-BM404932_4W-BM403041
SHOCKS 40mm ADJUSTABLE FRONT and REAR
2,899.00 AED
2,899.00 AED
Product not available
Add to Cart
Description:
( 4W-BM404932) FRONT 40mm ADJUSTABLE - STRUT TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimizing aeration and cavitation to maximize the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary
( 4W-BM403041) REAR 40mm ADJUSTABLE - SHOCK ABSORBER TOYOTA LANDCRUISER 300 SERIES 2021-UP
TOYOTA LANDCRUISER 300 SERIES 2021-UP
The 40mm adjustable shock brings the ability to fine tune your ride control to just about every 4WD user. The shock offers 9 different stages of adjustment, to fine tune the ride characteristics to your personal preference and application. In reality, very few vehicles serve only one purpose. Most 4WD’s today are the family car, off road toy, touring escape, towing rig or tradesman’s work platform all rolled into one. We demand so much of our vehicles, and every situation will need something just a little bit different. As well as being fully adjustable, these shocks are equipped with Foam Cell technology, minimizing aeration and cavitation to maximize the shocks ability to resist fade, and perform reliably in harsh and demanding conditions. Tough Dog adjustable shocks are built tough for the Aussie outback, and incorporate an ABS plastic dust shield as well as an external dust wiper seal to protect the shock’s internals from grit which can damage the oil seals around the chrome rod. When fully extended, the shock is at its most vulnerable to damage from side load. The internal bump stop and piston rod guide ensure the shock is supported at the extremes of its travel. These tough units are available for a wide range of applications. 40mm internal bore 60mm external casing 18mm chrome-plated rod High temperature, all weather oil Foam cell 9 Stage external adjustment Additional welding on all studs and eye rings *Representative Image Contents May Vary
Part Number: BNDL_BIL 24-292740_BIL 24-292757
SHOCK ABSORBER STOCK HEIGHT (WITHOUT RESERVIOR) B8 5100 SERIES- FRONT/REAR
Description:
( BIL 24-292740) BIL 24-292740 B6 4600 SERIES-SHOCK ABSORBER STOCK HEIGHT FRONT (WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 1998-2007
TOYOTA LC 100 1998-2007 VA: KING SPEED: KSW B6 4600 FRONT (without reservior) Product Description Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
( BIL 24-292757) BIL 24-292757 B6 4600 SERIES-SHOCK ABSORBER STOCK HEIGHT RAER(WITHOUT RESERVIOR)
TOYOTA / LAND CRUISER / 1998-2007
TOYOTA LC 100 1998-2007 HA: KING SPEED: KSW B6 4600 REAR (without reservior) Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.