Skip to the beginning of the images gallery
OVERVIEW
The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Increases horsepower and torque
Replaces stock air box, air filter and intake tubing
Cold Air Dam panels block out hot engine bay air
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Replacement Filter 701-456
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Worm Gear
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-18
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 11.2 lb (5.1 kg)
Product Box Height 10.7 in (272 mm)
Product Box Length 36.3 in (922 mm)
Product Box Width 12.5 in (318 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2006 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2005 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

2004 Jeep Wrangler 4.0L L6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-18

TUV Approved (Europe): No

OVERVIEW
The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

MORE INFORMATION
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box (where applicable)
Easy to install using commonly available tools
Easy to clean oil-free synthetic air filter
Washable and reusable air filter media

SPECIFICATIONS
Estimated Horsepower Gain 12.3 HP @ 5000 RPM
Replacement Filter 701-462
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Clamps Included 8
Clamp Material Steel
Clamp Style Spring
Couplers Included 2
Product Style AIRAID Intake Kit
Air Filter Outlet Shape Round
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Cross-Linked Polyethylene
CARB EO Number D-609-19
Street Legal In All US States See Vehicle Applications
TUV Approved (Europe) No
Weight 11.6 lb (5.3 kg)
Product Box Height 15.6 in (396 mm)
Product Box Length 19.9 in (505 mm)
Product Box Width 15.6 in (396 mm)
Mounting Hardware Included Yes

VEHICLE APPLICATIONS
Supported Vehicles
2017 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2016 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2015 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2014 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2013 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No

2012 Jeep Wrangler 3.6L V6 Gas

All Models

Street Legal in All US States: Yes

CARB EO Number:

D-609-19

TUV Approved (Europe): No